On 12/15/2020 03:43 PM, andy pugh wrote:
The first time I tried it, I got what I expected, then I
tried again and now it gives the wrong behaviour every
time. So at least I have a system to try debugging on.
BTW, using a PC and Axis 2.7.14 (still with the MESA) it exhibits the same
issue.
Which suggests that it isn't related to the mult-spindle changes, as I assumed.
No, I think this behavior has been there for QUITE some
time. Normally, I start and stop the spindle
with G-code, when running an actual program. But, when
manual machining, I use MDI to start the spindle with M03
S###. Any time the spindle has been stopped by command or
program end (M02) or F9, then you need both the command
(M03) and set the speed S###. It's been like that since
Axis was created, I think.
Jon
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
