It isn't specifically a 30mm wrench but it will suffice. https://www.mscdirect.com/product/details/07829864
Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: Gene Heskett <ghesk...@shentel.net> Sent: Wednesday, January 20, 2021 2:08 PM To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Subject: [Emc-users] NURBS G5.2 G5.3 works well [EXTERNAL EMAIL] Be sure links are safe. Greetings all; Since I can't buy a 30mm wrench that doesn't weigh 10+ lbs, and is 15-20" long, I am carving out a 30mm ER20 nut wrench from 1/2" alu plate, using G5.2/G5.3 to carve out a profiled handle, and its working rather well. The total amount of spindle time however, is gonna make me sell the pair for about $200 though. Those puny X rails on a 6040 are wanting to let it chatter, a lot. I'll use the same basic code to make the 21mm version to fit the double D flats on the chuck. Conditionalized of course, so it makes one or the other. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
