On Monday 08 February 2021 05:04:58 Gregg Eshelman via Emc-users wrote: > To identify a USB 3.0 port where it's not blue, look for the trident > logo with SS (for Super Speed) instead of the regular straight 'shank' > on it. No such critters to be seen. > On Monday, February 8, 2021, 1:55:37 AM MST, Gene Heskett > <[email protected]> wrote: Greetings all; > > When I took the newer Dell computer out to the garage and hooked it up > late this after noon to drive the GO704, I plugged in the old camera, > and logged into it from the house just now. I ran linuxcnc -l, and > chased down and installed stuff that running linucnc said it couldn't > find. > only one light on out there and the camera is hanging on the cable > looking at a very dimly lit black hole behind the machine. > It still comes on with the shakes but soon settles if the axis screen > is pulled bigger than startup. But I went thru all the motions that > killed the camera so bad that when it quit streaming the only recovery > was a full powerdown reboot. > > I just ran lcnc/axis at up to a full 1920 hd screen and back to as > small as I can make the axis screen. Several times at various speeds, > the cameras nearly black image never hiccuped. But its a usb2 camera > running at about 8 fps in the dark. The machines bios says it has some > usb3 ports, and the new camera needs them as its quite a bit higher > resolution. Now I have to figure out which ports are usb-3, Dell > didn't colorcode any of them pale blue. > > So I've got a wide grin. I might actually be able to use it. ;-) > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
