Nick, You’re going to want to purchase new posts. The are actually hardened and ground to two different diameters, undersize by a couple of tens for the bushings and 2-3 thou oversized for pressing into the stationary plate of the set.
I got mine here: https://www.janesvilletool.com/C/156/StraightGuidePosts N. Christopher Perry > On Mar 24, 2021, at 3:26 PM, andy pugh <bodge...@gmail.com> wrote: > > On Wed, 24 Mar 2021 at 19:10, Nicklas SB Karlsson <nk@nksb.online> wrote: > >> for sheet metal bending tool but should work for the few parts I expect >> to need. ... bending tool will be used to make boxes >> for my driver cards, > > If I was making a sheet metal bender I would make an electromagnetic one. > > http://aaybee.com.au/Magnabend/Magnabend_Homepage.html > > (Note section 6 which tells you how to make one, if you don't want to > buy a commercial one) > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users