On Monday 29 March 2021 11:24:18 andy pugh wrote: > On Mon, 29 Mar 2021 at 01:26, Gene Heskett <[email protected]> wrote: > > Thats not what I have, and DDG searching for PEI gets you about the > > first 500 hits for Prince Edward Island. :) > > Try eBay and "PEI Printing Surface"
I didn't quite hit that but I found foot square sheets with adhesive at gizmodorks and have 2 sheets coming. The dremel has a non square work glass a bit larger than 5.5 x10 inches. So to get that 10.375" I have to buy foot squares, but the price at gizmodorks wasn't that outrageous. Since I have come to the conclusion I damaged the nozzle by burning out the obstruction, I've bought two hardened, plated steel nozzles from microswiss that are claimed to fit the dremel. We'll see when they arrive. In the meantime, I've found why the first layer of the rollers came off the glass, they were shorter than the races so the printer was trying to lay then up in the air 2 or 3 layers off the glass. Fixed, gonna make breakfast and start another test print. ====== I have since started it 6 or so times, finally getting a usable head gap, now scaling the flow down trying to keep it from slobbering, leaving a blob on top of a dot, then busting a dot loose and sticking it to the nozzle, which then wipes out the rest of the roller dots as it come to put the 2nd or third layer on them. These patches to make cura run a digilab aren't claimed to be optimized, and I hearby nominate that for understatement of the year. Qestion, nearly to the bottom of the config options for cura, is a flow statement that sorta reads like it might scale all the rest of the flow settings in one swell foop, called "Flow rate compensation factor". Can anyone confirm that it is a global setting? Thanks all. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
