A big thank you from me too for keeping this excellent software going
and up to date!!!!
I used LCNC to re-brain an old Emcoturn 220P lathe and am now using it
commercially to try and make a living (I couldn't have afforded to do
that otherwise). So, it's literally life changing :)
Thanks again,
Pete
(PurbrookEngineering.com)
On 28/06/2021 00:08, andy pugh wrote:
LinuxCNC 2.8.2 has been released.
This is mainly a bugfix release, though it also adds a new HAL
component ("sendkeys") for creating input device events from HAL pins.
All users are encouraged to update.
In addition there is a new RTAI kernel based on 4.19.195. This comes
with a new version of RTAI 5.3. Both should be automatically installed
with the 2.8.2-rt version of LinuxCNC. If you are using the ISO
install or know that you are running the preempt-rt kernel this need
not concern you.
Thanks to the following contributors: alkabal Chris Morley damiodj
Dewey Garrett elovalvo Greg Carl Hans Unzner Håvard Flaget Aasen john
Kiall Mac Innes McCodie NhanPham Norbert Schechner Phillip Carter Rene
Hopf Sascha Ittner
The abridged changelog:
gladevcp: Numerous Updates
qtvcp -cam_align panel: allow selection of camera number
gmoccapy_3_1_3_8 - many updates
Typo correction Axis.py "Geometry reading" XYZBCUVW > XYZABCUVW
Docs add info on loading halscope
update 2.8 from master for xhc-whb04b-6
Merge pull request #1024 from kiall/2.8-axis-error-pin
translations - fixed moccapy / gmoccapy errors
Update hostmot2.9
Fix: update manual SSI
Update abs_encoder.c
add info on installing mesaflash
rx_mode typo in hm2_uart_setup
Docs: Many updates
flipflop: Add an inverted output pin, like the classic D-type latch
pncconf -fix inverting of steppers, in the tune axis test
qtvcp -qtaxis: change controls for lathe configs
pyui -fix commands for joints/axis changes
Docs: Correct pin direction 14 in the parallel port docs
gmoccapy_translations - new translation files
interp_o_word.cc: mdi-opened files leak #1088
command.c: use consistent external offset epsilon
sendkeys: A HAL component to send keystrokes and UI events
plasmac: fix material verter for sheetcam update
fix halcompile singleton option on userspace components
pncconf -fix internal description of 7i73 mode 1
pncconf -fix sserial number when parcing XML
pncconf -fix sserial channel number for the 7i96
Docs: Update URL to updated Pi SD card image. Also document limitations.
Merge pull request #1052 from Hans470/2.8-restructure-hal-doc
pncconf -many uodates
Added new version of Raspberry Pi4 and Raspberry Pi 400
AXIS: Add an axisui.error pin
qtvcp -qtDragon docs: add a bit of information about probing.
Update near.comp add {} for syntax coherence
PlasmaC: Many Updates
hal_glib -fix check_for_modes always failing
emccanon.cc GET_EXTERNAL_TOOL_SLOT hdl bogus request
Revert bad change inside driver XHC-WHB04B-6 lcnc 2.8
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
