Thank you. At the moment work-work has reared its ugly head and the lab bench has to be cleared off for a test and verify system so the Pi4, BoB, MESA 7i92H and other stuff has to be put on the shelf for now.
May even have to clean off the table saw top since it often also serves as a workbench and I'm almost done with putting together the mist cooling and power draw board hardware. That too has to go back on the shelf for now. OTOH, the work-work pays for the hobby. John > -----Original Message----- > From: Jose Luis [mailto:[email protected]] > Sent: July-22-21 6:51 PM > To: [email protected] > Subject: Re: [Emc-users] ProbeBasic > > you may also need to manually install the VTK library to get the 3D plotter > > https://scottalford75.github.io/LinuxCNC-on-RPi/4.%20VTK%20for%20QtPyVCP.html > > On 7/23/21 3:28 AM, Jose Luis wrote: > > hello, > > > > the installer is x86_64 only > > > > to install on the pi you could install from sources > > > > steps are on the developement install section > > > > https://kcjengr.github.io/probe_basic/dev_install.html > > > > > > Thanks > > > > On 7/23/21 2:23 AM, John Dammeyer wrote: > >> Quick question. > >> Followed the instructions here: > >> https://kcjengr.github.io/probe_basic/quick_start.html > >> Downloaded the ProbeBasic-Installer onto the Pi4 which already has a > >> functional LinuxCNC 2.8.2 with AXIS. > >> �From the command line in the downloads folder after I've set execute > >> permission when I try and run I get: > >> "cannot execute binary file: Exec format error" > >> � Is it possible that this is only meant for PCs and won't run on a > >> Pi4?� I thought it was purely a Python app. > >> Thanks > >> John > >> > >> _______________________________________________ > >> Emc-users mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
