Impressive. Lots of questions. Why did you make two passes? Just because? Seems like the spirals could get caught and muck up the threads on the second pass.
Was this steel or aluminium? What type of coolant are you using? Do you have an oil separator disk or belt and aeration to keep it from getting smelly? I did my 10-32 tapping at 150 RPM. Still scary how fast it moves up and down. John > -----Original Message----- > From: andrew beck [mailto:[email protected]] > Sent: August-09-21 1:20 PM > To: Enhanced Machine Controller (EMC) > Subject: [Emc-users] Just a little rigid Tapping Clip. With peck tapping > > M14x2 spiral flute tap. > > Rpm 400 > > Pecking 15mm.total depth 35 > > I can turn main power off at the wall and it will re line up with tapped > threads so long as I leave it in the vice. > > That's so cool. Love linuxcnc > > Might try a m20 tap sometime. I have 7.5kw spindle. Be interesting to see > if it can push it lol > > https://youtu.be/6QX2Qm3I2Ak > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
