On Tue, 14 Sept 2021 at 20:39, John Figie <[email protected]> wrote:
> I see that there was some work proposed for a SPI sub-driver for hostmot2 > <http://wiki.linuxcnc.org/cgi-bin/wiki.pl?SPI_Sub-Driver_For_Hostmot2> but > maybe not much has changed since this was added to the wiki. You probably need to write your own, to suit the hardware. This can be done as a custom HAL component: http://linuxcnc.org/docs/2.8/html/hal/comp.html Modifying the existing 7i65 driver .comp might be a good starting point: https://github.com/LinuxCNC/linuxcnc/blob/master/src/hal/drivers/mesa_7i65.comp -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
