Hi Todd, Eventually I will get back to working with the AXIS display for access to various parameters and adding graphical tools for standard operations. But I keep getting distracted by other things that eat up time.
John Dammeyer > -----Original Message----- > From: Todd Zuercher [mailto:to...@pgrahamdunn.com] > Sent: October-21-21 10:03 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Work Coordinate Editor? > > For the same reasons that it is nice to have the tool table editor and not > have to remember and use MDI commands. It is also nice to > be able to see the values of work coordinate offsets without having to > load/switch to that coordinate system. (And it is the way our > machine operators are used to working with Fanuc machines.) > > Todd Zuercher > P. Graham Dunn Inc. > 630 Henry Street > Dalton, Ohio 44618 > Phone: (330)828-2105ext. 2031 > > -----Original Message----- > From: andy pugh <bodge...@gmail.com> > Sent: Thursday, October 21, 2021 11:33 AM > To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] Work Coordinate Editor? > > [EXTERNAL EMAIL] Be sure links are safe. > > On Thu, 21 Oct 2021 at 16:28, Todd Zuercher <to...@pgrahamdunn.com> wrote: > > > > How hard would it be to add an editor to Linuxcnc (specifically for the > > Axis ui) for displaying and editing the work coordinate > offsets directly? Something similar to the tool table editor, where you can > view and edit all of the work coordinate values for each > axis (G54, G55, G56...). > > Probably not all that hard. It could potentially be a tab in tooledit. > > I am curious what the use-case is? On the rare occasions that I have wanted > to do this I have used G10 in MDI. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is designed for > the especial use of mechanical geniuses, daredevils > and lunatics." > - George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Femc- > users&data=04%7C01%7Ctoddz%40pgrahamdunn.com%7C7bc8b7cc74024a89943208d994a82d62%7C5758544c573f47cebee9 > 6c3e0806fb43%7C0%7C0%7C637704272300378355%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJ > BTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=MdRzuvEh38qz25tAtDRbvtsSIA8Sg7uTljWpXxVFhyI%3D&reserved=0 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
