The best stuff is PTFE based, "Superlube" for $5 on Amazon. This is a "food-grade" lube which means it is ok to use on food prep equipment (not to eat) and is non-reactive. It is what "everyone" recommends for 3D printed gearboxes. amazon.com/Super-Lube-21030-Synthetic-Grease <https://www.amazon.com/Super-Lube-21030-Synthetic-Grease/dp/B000XBH9HI/ref=asc_df_B000XBH9HI/?tag=hyprod-20&linkCode=df0&hvadid=167152075853&hvpos=&hvnetw=g&hvrand=2257681426504032291&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031026&hvtargid=pla-315922229188&psc=1>
Teflon is good stuff. It has low friction and is 100% non-reactive. I don't know what a carrier is but if the stuff is "food grade" i'd guess it is mostly harmless. On Wed, Dec 1, 2021 at 9:22 AM Gene Heskett <ghesk...@shentel.net> wrote: > I'll also add some white lithium grease and then run it for a number of > hours. I suspect , > > > That petroleum based grease will craze the plastic, Sam. You need a > vegetable based grease or oil, crisco is cheaper than the "special" stuff > for plastic, which I've used on the bb's in miine. > > > OTOH the special stuff is IMO a bit thicker than crisco, I bought a small > can on it for $14 from > some guy in China. > > > Still on webmail (spit) excuse the mess. 7 damned bullseye installs later > I still don't have > the tools to make a proper email agent work.. > > > > Take care and stay well John. > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Chris Albertson Redondo Beach, California _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users