Which documentation? thanks
On Wed, 2022-01-26 at 16:16 +0100, Rene Hopf via Emc-users wrote: > Did you recently pull master? > You are using python 2.7 which isn’t supported in master anymore. > The updating documentation has steps required to change the > configuration for python related things. > > > On 26. Jan 2022, at 16:03, Valerio Bellizzomi <vale...@selnet.org> > > wrote: > > > > I got this error but this configuration was working before and I > > made > > no changes. Can you help me? > > > > > > ~$ linuxcnc ~/linuxcnc/configs/sim.qtpyvcp/xyzab.ini > > LINUXCNC - 2.9.0-pre0-4771-ged1f4ddf7 > > Machine configuration directory is > > '/home/sel/linuxcnc/configs/sim.qtpyvcp' > > Machine configuration file is 'xyzab.ini' > > Starting LinuxCNC... > > File: tool.tbl Unrecognized line skipped: > > ;Tool Pocket X Offset Y Offset Z > > Offset Diameter Remark > > Found file(REL): ./hallib/core_sim_5.hal > > Note: Using POSIX realtime > > motion.c: Creating unlock hal pins for joint 4 > > Found file(REL): ./hallib/spindle_sim.hal > > Found file(REL): ./hallib/simulated_home_xyzab.hal > > Traceback (most recent call last): > > File "/usr/local/bin/qtpyvcp", line 10, in <module> > > sys.exit(main()) > > File "/usr/local/lib/python2.7/dist-packages/qtpyvcp/__init__.py", > > line 90, in main > > from qtpyvcp.utilities.opt_parser import parse_opts > > File "/usr/local/lib/python2.7/dist- > > packages/qtpyvcp/utilities/opt_parser.py", line 55, in <module> > > from linuxcnc import ini > > ImportError: No module named linuxcnc > > Shutting down and cleaning up LinuxCNC... > > task: 1 cycles, > > min=179769313486231570814527423731704356798070567525844996598917476 > > 8031 > > 5726078002853876058955863276687817154045895351438246423432132688946 > > 4182 > > 7684675467035375169860499105765512820762454900903893289440758685084 > > 5513 > > 3942304583236903222948165808559332123348274797826204144723168738177 > > 1809 > > 19299881250404026184124858368.000000, max=0.000000, avg=0.000000, 0 > > latency excursions (> 10x expecNote: Using POSIX realtime > > LinuxCNC terminated with an error. You can find more information > > in > > the log: > > /home/sel/linuxcnc_debug.txt > > and > > /home/sel/linuxcnc_print.txt > > as well as in the output of the shell command 'dmesg' and in the > > terminal > > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users