On Tue, Apr 5, 2022 at 11:47 AM dave engvall <dengv...@charter.net> wrote:
Hi all,
I have a pair of ball screws: THK KX 71227 A These are new but older
and as far as I can tell not on the THK site.
They are threaded on one end to retain a bearing.
M15 x 0.8 or close. Does anyone know of a bearing nut that would fit
or am I stuck with having a pair custom made?
I've spent a fair amount of time searching the web but maybe
(probably) someone else's google foo is better than mine.
As always TIA
Dave
Check and see if it is .586-32TPI. That is the diameter and pitch for a
N-02 nut which is for a shaft for a M15 shaft.
People lucky enough to live in metric land would use an M14 or 15
bearing lock nut but they have pitch of 1mm or 1.5 mm.
Ed.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users