On Mon, 2 May 2022, hdpre...@gmail.com wrote:
Date: Mon, 2 May 2022 06:32:41 +0200
From: hdpre...@gmail.com
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Connecting Mesa 25 pin daughtercards to 50 pin FPGA
card??
HI
Is this possible?
For example, can I connect a 7i77 + 7i74 to a 7i80HD using a special cable?
I see there is a converter board on Mesa's website, but I only realised now
that I messed u when ordering, and also the 7i80DB's were out of stock.
For this case, can I just refer to the pinout config that mesaflash will
display? Then again, I don't see firmware for the 7i80HD with say 2x7i77
+7i74. Can I use the 7i80DB firmware?
Regards
Henk
Its possible, but needs custom firmware (7I80DB firmware will not work)
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
