No, for some reason I hadn't checked with Siemens. One of our machines even has a Siemens drive, but it's a gigantic thing that would never fit this machine's cabinet. I'll look into it.
We did order a Yaskawa drive, and are waiting on it to come in, figuring that if we get in a bind and can't wait for it we can knuckle under and pay the machine manufacture their price for one they have in stock, and keep the other as a spare. But for the time being we are slow enough we can make do without that machine and can wait for the one we ordered. Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: Dave Cole <linuxcncro...@gmail.com> Sent: Monday, May 09, 2022 1:56 PM To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] Hight Frequency VFD [EXTERNAL EMAIL] Be sure links are safe. Have you checked to see if Siemens can help you? In order to go that fast they will sell you a license to install in a more or less standard drive. I understand that high freq drives can be used for other things, like gas centrifuges. So they try to keep track of where they go. Dave On Tue, Apr 26, 2022 at 11:42 AM Todd Zuercher <to...@pgrahamdunn.com> wrote: > Anyone know a good place to purchase a high frequency VFD? We had the > drive in one of our CNCs die. The old drive was a HSD DS15000. The > spindle is an 18kw 24000rpm 4pole HSD router motor. The old drive is > rated for 1-1000hz and that seems to be the problem, all of the off > the shelf drives I can find are limited to output frequencies less > than 500hz which would limit our spindles top speed to only 15000rmp. > Our machine builder quoted us for a Yaskawa V1000 drive with 1000hz > firmware (model# > VU4A0038FAA-134) that they do have in stock but they are marking up > their price to more than double the normal list price for that drive. > Every other place I've checked with so far are quoting us months long > lead times for that drive. > > I don't have to have a Yaskawa drive, I think I'd be ok with any drive > capable of 15kw and at least 800hz output. (Oh, it would be nice if > it would fit in the cabinet where the old one did, have about 9inches > x 15inches of space there.) > > Anyone have any suggestions for a good source for "obtainable" drive > that would fit the bill? For example we have a machine with a Fuji > Frenic drive with 0-1000hz, but I can't find any info on buying a new > equivalent, all the new Frenic drives I can find have max frequencies > under 500hz. I'm guessing it is similar to Yaskawa for most other > manufacturers where you have to live in the right part of the world, > ask nicely and then maybe they might sell you a drive with the "special" HF > firmware. > > Todd Zuercher > P. Graham Dunn > Inc.<https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2F > www.pgrahamdunn.com%2Findex.php&data=05%7C01%7Ctoddz%40pgrahamdunn > .com%7Ceea41877b2b24396742608da31e56516%7C5758544c573f47cebee96c3e0806 > fb43%7C0%7C0%7C637877158582440736%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4w > LjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C > &sdata=uOHHxs%2BZDOeFn049Ft%2FPGkCynNdbIqcS5ngvUh8IAds%3D&rese > rved=0> > 630 Henry Street > Dalton, Ohio 44618 > Phone: (330)828-2105ext. 2031 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flist > s.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=05%7C01%7Cto > ddz%40pgrahamdunn.com%7Ceea41877b2b24396742608da31e56516%7C5758544c573 > f47cebee96c3e0806fb43%7C0%7C0%7C637877158582440736%7CUnknown%7CTWFpbGZ > sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3 > D%7C3000%7C%7C%7C&sdata=Hk9kyvMOSySaGehu%2Bet8v7noYELOJLNG5M4CHy8Q > 63A%3D&reserved=0 > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=05%7C01%7Ctoddz%40pgrahamdunn.com%7Ceea41877b2b24396742608da31e56516%7C5758544c573f47cebee96c3e0806fb43%7C0%7C0%7C637877158582440736%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Hk9kyvMOSySaGehu%2Bet8v7noYELOJLNG5M4CHy8Q63A%3D&reserved=0 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
