And I'm helping him here in the ground guys. We want a config to get started.
And gene are you still using these boards? On Wed, 10 Aug 2022, 1:41 pm wayne dalton, <vvega...@hotmail.com> wrote: > > > > Howdy > My names Wayne Dalton , I’m in New Zealand . > I have these 2 units (7c80 and rpi4) and I’m working towards getting them > working correctly . > I have Linux cnc installed , I worked from new newest rpi install and then > installed Linux cnc from there rather than the Linux cnc official install … > because that came up with .. errors . I followed an install guide I found > on Linux cnc but the threed didn’t explain how exactly to do the config . > > I can get the pi to ping the board in command line > ( I’m not great with Linux at all btw ) > So now I’m at the point of building a hal for the board . > I understand … you install a different board and then just assign all the > pins and set it to spi for communication but this is where im getting lost . > I’ve had a look on Linux cnc and there are maybe 2 posts , one of them > have a test Hal and Ini file with everything assigned but honestly I’m not > understanding how I transfer than in or even get Linux cnc to see it . > I’ve tried accessing a couple files but it just tells me I don’t have > permission …. But I’m not even sure I have the right files so that might > not be a bad thing . > Any help or insight is appreciated > > The application is a converted knee mill ( kondia/Bridgeport) and I’m > working on finishing the 4th and 5th axis design . > I’m using ac servos that have step and direction capability as well as a > encoder output . > I’m currently rebuilding the machine with ballscrews and I’m hoping to > finish the electronics control in parallel while I wait on small parts to > arrive . > > Using a 4g rpi4 with a 128gig sata m.2 drive > > > > Cheers > Wayne dalton :) > > > > Sent from my iPhone > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
