On Tue, 25 Oct 2022, Alan Condit wrote:
Date: Tue, 25 Oct 2022 21:27:54 -0500
From: Alan Condit <condit.a...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: EMC-Users <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] Conversion from Linuxcnc 2.8.2 to master - now have
missing "dpll" pin
I commented out the two offending lines from the new configuration file. Now it
doesn??t error out on the missing lines:
#setp [HMOT](CARD0).dpll.01.timer-us -50
#setp [HMOT](CARD0).stepgen.timer-number 1
However, the very first error is the ??Watchdog has bitten??.
It seems like an error in pncconf if it inserts dpll.01.timer-us where
mesa software has no dpll pins or am I misunderstanding this?
Alan
pncconf doesnt know if the firmware has a DPLL or not
(though all recent EThernet firmware does)
What hardware do you have?
A watchdog bite likely indicates a real time issue with the host or OS.
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
