I assume you could program a stepover operation if you have a Y axis lathe. FYI, this broaching canned cycle from Haas works in mills too from what I understand. So you should be able to do stepovers in the mill without issue.
> On Oct 27, 2022, at 12:48 PM, Roland Jollivet <roland.jolli...@gmail.com> > wrote: > > Maybe this G156 could be implemented in Lcnc.. > > https://www.youtube.com/watch?v=N_tozv1szIo > > It's great, but also limited in that you need a broaching tool the width of > the broach. > One should be able to broach a 4mm slot with say, a 3mm width tip > > > > > > On Tue, 25 Oct 2022 at 10:45, andy pugh <bodge...@gmail.com> wrote: > >> On Tue, 25 Oct 2022 at 09:31, Roland Jollivet <roland.jolli...@gmail.com> >> wrote: >>> >>> If you have a CNC lathe, you could do this; >>> >>> https://www.youtube.com/watch?v=TW6QPl8Oy7g >> >> It could be done with a mill too, with a non-rotating fixture on the >> head. But that still needs a run-out at the shoulder. >> >> -- >> atp >> "A motorcycle is a bicycle with a pandemonium attachment and is >> designed for the especial use of mechanical geniuses, daredevils and >> lunatics." >> — George Fitch, Atlanta Constitution Newspaper, 1912 >> >> >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
