That link doesn't work for me. John > -----Original Message----- > From: John Figie [mailto:zephyr9...@gmail.com] > Sent: November-30-22 1:33 PM > To: emc-users > Subject: [Emc-users] Clausing NC Progress > > I took Andy Pugh's suggestion and made my own .comp for the tool turret. > Next I have the Huangyang VFD using the hy_gt_vfd hal component. Yesterday > I installed the spindle encoder and added the hal spindle component for the > 3 speed geared head. I have some suggestions for some small changes to the > documentation that might make understanding how to use this comp much > better. I know Andy just took my last corrections to the docs and updated > them. Is that the best process? I think I should do something soon before > it is forgotten. > > Here is a video of the second time using the machine now with a working > turret and spindle encoder. I will have to try threading soon. > > Clausing NC 1550 > <https://photos.google.com/album/AF1QipNboAXexCb1uiiVkiEeRmsYLOU6aZIV9Z2QUZXT/photo/AF1QipPH > 20Yw9N_pP6DQiM7r15A83rDe0wpiAqJnbJoL> > > Yet to do: > 1) Add a braking resistor to the VFD so I can stop faster. > 2) Get a proper E-Stop mounted on the machine and some other important > buttons like program pause and run. Maybe on the panel below the speed > selector I will add things like the VFD faceplate, E-stop. Start and Stop > buttons, MPG etc. > 3) Figure out how to index the head so I can cut some splines. > Maybe I will mount a disk with holes like an index plate on the back of the > chuck. But what about using the spindle orient g codes and then some kind > of holding brake? > > John Figie > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
