Yes the manual say so. If you choose menu "Machine" item "Show hal configuration" it is also possible to find which pins are available.
sön 2022-12-11 klockan 07:35 -0600 skrev John Figie: > "Do I just add -not to the end? > net toolsense-in <= hm2_7i92.0.gpio.030.in-not" > > I think that is the way to do it. That is how it works with my 7i80 > > http://linuxcnc.org/docs/stable/html/man/man9/hostmot2.9.html > > > > On Sat, Dec 10, 2022, 10:34 PM John Dammeyer <jo...@autoartisans.com> > wrote: > > > One of the relies by Todd Zeurcher on the forum > > https://forum.linuxcnc.org/27-driver-boards/33646-mesa-7i76-invert-input-pin > > states to invert the input > > hm2_5i25.0.7i76.0.0.input-00-not > > > > I'm using the 7i92 and my inputs are referred to in this way. > > net toolsense-in <= hm2_7i92.0.gpio.030.in > > > > Do I just add -not to the end? > > net toolsense-in <= hm2_7i92.0.gpio.030.in-not > > > > > > Thanks > > John > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > John Figie > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
