On 12/18/22 15:53, Chris Albertson wrote:
I buy the smaller 3mm and down bits from Chinese suppliers in bulk in
ziplock bags. They are so cheap there is no point wasting time sharpening
them. The cost works out to 16 cents per bit.
I think this is why the sharpeners only go down to a minimum size, it is
not worth it for a 16 cent bit. Yes they are good quality
One example ebay.com/itm/134264963420
"Note:
Please allow 1-3mm error due to manual measurement. please make sure you
do not mind before you bid. "
Do they mean the length or technically they could send you an bag of 0mm
drills and still be in spec :)
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
