Hi guys. Sorry for the OT but I'm having a strange behavior with my spindle and I'm a little worried.
The problem I had today for the first time is the spindle was getting really hot and started to slip (you could hear the frequency from the inverter was on spot but the rotor sometimes wasn't even turning).After a few seconds of slipping the VFD triggered the over current alarm and the spindle was stopped. Once the the spindle cooled down it worked perfectly. This never happened before but also I must clarify that today the ambient temperature reached 40⁰C and I'm sure that under that roof where the router is placed there were 45⁰C so I suspect this has something to do with the problem. The spindle is rated 11kw of max power output and is air cooled. It has a built in fan motor so it doesn't rely on spindle speed for cooling. It always gets warm (there are several labels on the spindle’s body for caution because of the heat) but nothing like today. Could this be normal because of the extremely hot days I'm having here? Should I think about changing bearings or even rewind the motor? I've only had the over current alarms when the spindle was too hot. I will be really thankful if you can share your thoughts about this. Thanks for your help as always! Leonardo. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
