On 9/7/23 12:36, Peter Wallace wrote:
On Thu, 7 Sep 2023, gene heskett wrote:
Date: Thu, 7 Sep 2023 12:11:19 -0400
From: gene heskett <ghesk...@shentel.net>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Subject: [Emc-users] question for Peter C. W.
Greetings Peter;
Where on the 7i76, does pwmgen.00 of the 5i25 come out on?
Normally, nowhere, standard 7I76 firmware doesnt use a PWMgen for its
analog output, its part of the field I/O sserial remote. Its control
pins/parameters
would be:
pins:
hm2_5i25.0.7i76.0.0.spindir # direction output
hm2_5i25.0.7i76.0.0.spinena # high to enable ENA pin and Analog out
hm2_5i25.0.7i76.0.0.spinout # analog value (positive only)
exactly what I had before I added the bs-1 I believe. Using one of Jon's
pwm-servo drivers with extra toroids. Thanks Peter.
parameters:
hm2_5i25.0.7i76.0.0.spinout-scalemax # sets scaling of analog value
hm2_5i25.0.7i76.0.0.spinout-minlim # sets minimum analog value,
typically 0
hm2_5i25.0.7i76.0.0.spinout-maxlim # sets maximum analog value,
typically
same as scalemax = max RPM
on dead tree FFR.
Can I hal route the pwmgen.00 to the spindle pins on the 7i76 if not
already there? I'm putting a 3 phase stepper/servo, driving a 5/1
worm as an A drive on my GO704. That means pwmgen.01 had to go, which
I was using to run the spindle cuz I needed the stepgen-4 outputs that
are overriding stepgen4 when 2 pwmgens are loaded, Now I need that
stepgen-4 for this A drive.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
