On 11/22/23 15:13, andy pugh wrote:
On Wed, 22 Nov 2023 at 19:15, Roland Jollivet <roland.jolli...@gmail.com> wrote:
Interesting, and it looks rigid enough for real work..
https://www.youtube.com/watch?v=4r4_uo6ZrAE
https://www.youtube.com/watch?v=ztW4JIbLSMs
Quite a clever idea for machines with closed controllers and no easy
way to provide motor power into the workspace.
With LinuxCNC it's probably always going to be better to be fully motorised.
I'd have to agree Andy. I need to design a disk brake for my A axis as
there's half a degree of slop in the worm drive which if it gets to the
motor will be held, but the slop in the worm makes for sloppy looking
holes, but the activation method is still in my head. Even that is only
important when drilling a hole for the handle. I'll come up with something.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
