Just to be more clear. The following error appears for example, if I'm turning a cam, in the moment the lift is being applied. If I just press the manual control button when the axis is not moving because it's on the base radius part, nothing happens. I suspect this is a configuration issue and I need to tweak a little bit more my config. Let me know if you need me to post my ini file.
El jue, 7 mar 2024 a las 9:28, Leonardo Marsaglia (<ldmarsag...@gmail.com>) escribió: > Has a physical axis become sticky / stiff? It sounds like you may be >> hitting the accel / speed limit in the case when there is a step >> change in the external offset. >> > > Hi Andy, > > As as far as I can tell, the axis is behaving as always. Just to clarify a > little more. This happens when I go from MDI to manual control when the > spindle is turning and the eoffset is making the X axis move almost > constantly. Sometimes it happens, sometimes not. Do I need to play with the > eoffset AV ratio? The acceleration of that particular joint/axis is pretty > high just to ensure the eoffset is applied as correctly as possible. > > One problem I notice is that whenever this following error occurs, my tool > diameter gets corrupted. No matter if I turn eoffset to 0 and clear it. The > only way to get the tool diameter ok is to home the axis again. Is this > normal? > > > > El mié, 6 mar 2024 a las 6:54, andy pugh (<bodge...@gmail.com>) escribió: > >> On Tue, 5 Mar 2024 at 16:30, Leonardo Marsaglia <ldmarsag...@gmail.com> >> wrote: >> >> > This hasn't happened a few days before so I don't know what has changed. >> >> Has a physical axis become sticky / stiff? It sounds like you may be >> hitting the accel / speed limit in the case when there is a step >> change in the external offset. >> >> -- >> atp >> "A motorcycle is a bicycle with a pandemonium attachment and is >> designed for the especial use of mechanical geniuses, daredevils and >> lunatics." >> — George Fitch, Atlanta Constitution Newspaper, 1912 >> >> >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
