On Tue, 13 Aug 2024, Alan Condit via Emc-users wrote:
Date: Tue, 13 Aug 2024 14:37:47 -0500 From: Alan Condit via Emc-users <emc-users@lists.sourceforge.net> To: EMC-Users <Emc-users@lists.sourceforge.net> Cc: Alan Condit <condit.a...@icloud.com> Subject: [Emc-users] Spindle counter vs Spindle encoder I built an encoder for the spindle of my CNC Lathe, however, I could never seem to get the A, B, and Index signals aligned correctly. I recently burned out one of the channels while trying to get stuff aligned. Is it possible in PNCConf to set 1 channel counter plus index? Or do I have to do that in the hal file? Thanks, Alan _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Looks like pncconf can do this by checking the 'Single Input Encoder'
You can also just edit the hal file and set the encoder counter mode true Peter Wallace Mesa Electronics _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
