Thanks. I'll give that a go. However before I do that I have to figure out why my tool setter now measures the tool at about 0.030" longer compared to the probe measuring the surface. Ie. The tool after measuring and at zero is below the surface of the probed surface. Not great for accuracy.
Must go through the whole process again of measuring the length of the probe, etc. I can't use the tool setter to measure the probe length because the probe trips before the tool setter does. > -----Original Message----- > From: andy pugh [mailto:bodge...@gmail.com] > Sent: January 11, 2025 2:00 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Automatic Probing. > > On Sat, 11 Jan 2025 at 20:14, John Dammeyer <jo...@autoartisans.com> > wrote: > > > > > How does one link in that touch off code? > > > > Inside the probe screen it is just doing G38.2 and G10 Lnn Znn > > You just need that in your G-code. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is designed > for the especial use of mechanical geniuses, daredevils and lunatics." > � George Fitch, Atlanta Constitution Newspaper, 1912 > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
