Does the pinout of the 7i95 changes with the new firmware to accommodate the Z physical pin of the encoder next to the stepgens?
El lun, 3 mar 2025 a las 15:44, Leonardo Marsaglia (<[email protected]>) escribió: > I linked the encoder index enable pin in hal to the index enable pin of > the stengen. Is this ok? > > My physical encoder index wires are connected to the encoder ports of the > 7i95. > > El lun, 3 mar 2025 a las 15:33, Peter Wallace (<[email protected]>) > escribió: > >> >> >The issue is, when I activate the HOME_USE_INDEX option the machine >> >absolute coordinate shows like -500 mm or something instead of 0 at the >> >moment of the final detection. So the machine moves to the 0 position >> after >> >triggering the index pulse. This shouldn't happen because I have both >> HOME >> >OFFSET and HOME POSITION set to 0. >> >> Are you using stepgen or encoder feedback? >> >> If you use stepgen feedback, no encoder pins should be used at all >> >> (you example showed you using both) >> >> Peter Wallace >> Mesa Electronics >> >> >> >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
