You might try GB OX-GUARD on the contacts to lower the friction.

--J. Ray Mitchell Jr.
jrmitche...@gmail.com

"Much of the social history of the Western world, over the past three
decades, has been a history of replacing what worked with what sounded
good."

-- Thomas Sowell



On Fri, Jun 6, 2025 at 12:33 PM fxkl47BF--- via Emc-users <
emc-users@lists.sourceforge.net> wrote:

> On Fri, 6 Jun 2025, jrmitchellj wrote:
>
> > nHave you tried tying a lanyard through one of the mounting holes, and
> using it to pull the connector out?
> >
> > I work with a highschool robotics team, and that is a trick they use on
> their competition robots.  But you need to be sure it is contained so not
> to get caught on something, and
> > accidentally disconnected
>
> i printed some trianglular handles for them
> i still need something with a little more mechanical advantage
> the handles are a help if one connector is bolted to something
> but if they are connected cable to cable it's a pain
> maybe the rope would work if i could put my foot on one connector
>
> > .
> > --J. Ray Mitchell Jr.
> > jrmitche...@gmail.com
> >
> > "Much of the social history of the Western world, over the past three
> decades, has been a history of replacing what worked with what sounded
> good."
> >
> > -- Thomas Sowell
> >
> >
> >
> > On Fri, Jun 6, 2025 at 8:12 AM fxkl47BF--- via Emc-users <
> emc-users@lists.sourceforge.net> wrote:
> >       i use quite a few anderson sb175 connectors
> >       https://powerwerx.com/anderson-sb-connectors-sb175-175amp
> >       my old hands are increasingly having a hard time disconnecting them
> >       is there a tool for this or maybe a design to make one
> >       i'm having no luck finding such a critter
> >
> >
> >
> >       _______________________________________________
> >       Emc-users mailing list
> >       Emc-users@lists.sourceforge.net
> >       https://lists.sourceforge.net/lists/listinfo/emc-users
> >
> >
> >
>
>
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to