Hi Peter, Yes, no problem.
Thank you. El lun, 8 jun 2026 a las 10:32, Peter Wallace (<[email protected]>) escribió: > On Mon, 8 Jun 2026, Leonardo Marsaglia wrote: > > > Hi guys, I hope you're doing well > > > > I've been using the following configuration several years now: > > > > 5i24 ----(P2) ----> 7i52 > > |--------(P3)-----> Free to use/unconnected > > |_____(P4)-------> 7i44 (with several sserial boards) > > > > The firmware on the board doesn't create any PWMGENS even though I'm > > declaring them on the hostmot2 loading string. > > > > I suspect the firmware is not ready to make them. If this is the case. Is > > there any firmware available that can keep my actual configuration (I'm > > using several STEPGENS and ENCODERS) and use P3 for the PWMGENS I need? > > > > Thanks a lot! > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > Can you run: > > sudo mesaflash --device 5i24 --readhmid > firmware.txt > > and send me the results? > > (to not clutter the mailing list) > > Its looks like you have a 7I52S so I can guess the firmware > but its best to be sure. > > Peter Wallace > Mesa Electronics > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
