Google search results? On October 19, 2026 7:20:54 PM GMT+08:00, andy pugh <[email protected]> wrote: >I wonder where it got this idea from? (in Master one can use "D" for >this, H remains spring passes) > >------begin AI slop------- > >LinuxCNC G-Code Approach (G76) > >In LinuxCNC, multi-start threading is streamlined using the G76 >threading cycle. The core to automating this is the H parameter >(number of thread starts) or using successive passes with a calculated >Z-axis shift, depending on your specific version's recent feature >update. >If your version fully automates it, your block will look similar to this: >gcode >G76 P0.5 Z-20.0 I-0.3 K0.4 F3.0 H6 ... >Use code with caution. >• F (Feedrate/Lead): This must be set to the total Lead, not the >pitch. (e.g., if Pitch = 0.5mm, then F = 3.0). >• H (Starts): Set to 6. LinuxCNC will automatically index the >spindle's index pulse by 60° increments for each start. > > > >-- >atp >"A motorcycle is a bicycle with a pandemonium attachment and is >designed for the especial use of mechanical geniuses, daredevils and >lunatics." >— George Fitch, Atlanta Constitution Newspaper, 1912 > > >_______________________________________________ >Emc-users mailing list >[email protected] >https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
