On 11/19/26 15:53, Gene Heskett wrote:
On 11/19/26 08:23, Viesturs Lācis wrote:
Hello!
I need a little help to understand what is going on.
I did a retrofit of Biesse CNC machine.
There is remap for M6 command to call for subroutine which switches
solenoids, moves carousel and checks inputs. In MDI everything works
fine. In g-code not so well - M6 T1 and M6 T2 are executed correctly,
but M6 T66 or M6 T68 cause "Near line 1: file ended without M2 or
percent sign". Commenting out M6 T68 line will reload g-code file just
fine:
https://www.youtube.com/shorts/U2XYWoyYepI
It is Debian 12 and version 2.9.3.
Tool table is here, all of those tool numbers are defined and should
be good:
https://photos.app.goo.gl/1p5PPc6P88dpYMN37
I would appreciate some hints on where to start looking.
Viesturs
Your editor? I had a similar occurance many years ago, gedit IIRC and
it was saving in a different font than it used to edit.
I had so much trouble with gedit saving my work as a 52 pickup puzzle.
Evenually nuked it, and switched to geany which has a similar syntax but
has, 20 years later, never made a save mistake.
Cheers, Gene
--
There are four boxes to protect liberty
Soap, ballot, jury, ammo
Please use in that order!
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users