Joe, nice proposal. Few questions: 1. We have a case of Basic Password Authentication instead of inner method thus we should also use Crypto-Binding TLV based on Zero-MSK after it 2. As Eliot mentioned, we have a case of no inner method at all - we should use Crypto-Binding TLV based on Zero-MSK after it 3. Since it is not clear whether MSK or Zero-MSK is used - we should introduce a new flag value for Crypto-Binding TLV: "0" - Zero-MSK based Compound MAC is used in place of MSK Compound MAC field. 4. We have a TLS-PRF usage ambiguity here (Errata 5127 and 5128): TLS 1.2 RFC 5246 in section "5. HMAC and the Pseudorandom Function" defines PRF(secret, label, seed) = P_<hash>(secret, label + seed)
TEAP RFC uses TLS-PRF several times: * IMSK = First 32 octets of TLS-PRF(EMSK, "teapbind...@ietf.org" | "\0" | 64) The call refers to RFC 5295 that defines USRK = KDF(EMSK, key label | "\0" | optional data | length) but that RFC says "USRKs MUST be at least 64 octets in length" and IMSK is 32 octets * IMCK[j] = TLS-PRF(S-IMCK[j-1], "Inner Methods Compound Keys", IMSK[j], 60) * MSK = TLS-PRF(S-IMCK[j], "Session Key Generating Function", 64) and similar for EMSK We can see that all three times the parameters are different and don't exactly fit the definition and this creates some confusion. In the other earlier thread you mentioned that truncation of 64-octets USRK to 32 octet is valid. In yet another thread you mentioned that we should define TLS-PRF function with the output size as a parameter and we should just concatenate for all TLS-PRF calls all the parameters starting from the second. Is that understanding correct? This should be also helpful when mapping to TLS1.3 HKDF extract and expand functions. Thanks Oleg On Thu, Oct 10, 2019 at 11:00 AM Eliot Lear <l...@cisco.com> wrote: > Just one comment: > > TEAP does not *require* an inner method, and indeed for IoT it is not > necessary. > > Eliot > > On 9 Oct 2019, at 07:46, Joseph Salowey <j...@salowey.net> wrote: > > Based on Jouni's analysis the derivation of the S-IMCKs is not well > specified. To me it looks like the solution to handle an arbitrary number > of methods that may or may not make an EMSK available would be fairly > complex. > > I think the most straight forward solution is to either always assume that > for an EMSK generating method the EMSK is either always available or always > unavailable. It seems that it is safer to always assume that the EMSK is > unavailable and will therefore never be used. I think this has the > following implications: > > - The S-IMCK is always generated from the inner method MSK or the > all-zero value if the method does not generate key material. > - The EMSK compound MAC is not used > - Implementations must have a policy that accepts MSK MACs > > It would appear that from a cryptographic analysis point of view the MSK > and EMSK are equivalent since these keys will only be used in these > TEAP calculations and not for other purposes.. There are documented > drawbacks of using the MSK described in RFC7029 ( > https://tools.ietf.org/html/rfc7029#page-12). If the properties of the > EMSK binding are needed in the use cases currently under consideration then > I think we could redefine the way the EMSK MAC to be computed from the EMSK > of the inner method changing the above to > > - The S-IMCK is always generated from the inner method MSK or the > all-zero value if the method does not generate key material. > - Compute EMSK MAC from the inner-method EMSK instead of the S-IMCK > Compound-MAC = MAC( EMSK[J], BUFFER ) > - Implementations have a policy that prevents EMSK downgrade to MSK > > Hopefully there is a more elegant solution. Any ideas? > > Joe > _______________________________________________ > Emu mailing list > Emu@ietf.org > https://www.ietf.org/mailman/listinfo/emu > > > _______________________________________________ > Emu mailing list > Emu@ietf.org > https://www.ietf.org/mailman/listinfo/emu >
_______________________________________________ Emu mailing list Emu@ietf.org https://www.ietf.org/mailman/listinfo/emu