On 18/11/11 16:48, Jochen Schröder wrote:
On 18/11/11 15:56, Mike Blumenkrantz wrote:
On Fri, 18 Nov 2011 15:50:09 +1100
Jochen Schröder<cycoma...@gmail.com> wrote:
On 18/11/11 15:46, Mike Blumenkrantz wrote:
On Fri, 18 Nov 2011 15:43:23 +1100
Jochen Schröder<cycoma...@gmail.com> wrote:
On 18/11/11 13:16, Mike Blumenkrantz wrote:
On Fri, 18 Nov 2011 09:18:50 +1100
Jochen Schröder<cycoma...@gmail.com> wrote:
Hi all,
I'm still trying to get eeze mount to work in E_FM. I have build
eeze
with libmount support (2.19.1). And I am building E17 with
./configure
--disable-mount-hal --disable-mount-udisks, here is the relevant
configure output:
Preferred Backends:
* device..............: eeze
* hal_mount...........: no
* udisks_mount........: no
* eeze_mount..........: yes
Additionally I have uncommented the following line in
sysactions.conf
# uncomment this line to enable eeze mounting for users
user: someuser allow: /bin/mount /bin/umount /usr/bin/eject
When plugging in a device on the usb port nothing appears on the
desktop
or in the file menu. xsession-errrors reports some dbus error
(attached). This system is debian sid. This seems to be the same
problem
that was reported here:
http://osdir.com/ml/enlightenment-development-linux-ui/2011-08/msg00503.html
Additionally, when logging out E waits until the logout now, wait
longer
dialogue shows up (however I have not 100% confirmed that this is
related).
Cheers
Jochen
hmm definitely strange since it looks like your devices are being
properly
detected. please start your e with EINA_LOG_LEVELS=efm:5 and post
back
your xsession log again.
Not sure I'm doing the right thing. Using a .xsession with:
export EINA_LOG_LEVELS=efm:5
exect /opt/e17/bin/enlightenment_start
and starting with startx should work right?
Not much more information unfortunately (xsession-errors attached)
Cheers
Jochen
yeah you did it properly. not seeing any attempts to mount anything
though,
does your log include the times when you tried?
You mean when I plug and unplug the usb disk? I can't mount because the
device never appears anywhere, i.e. no icon on the desktop or in the
files menu.
Cheers
Jochen
hmm update e now and see if you get the scanner connected message in
your log
with the log level enabled
Ok will do
I just updated from svn and recompiled all of EFL. Attached is the
xsession-error log when e is compiled with eeze mount only and I plug in
a usb disk. EINA_LOG_LEVELS=efm:5 is set (at least it's in env)
/etc/gdm3/Xsession: Beginning session setup...
/etc/gdm3/Xsession: 43: /etc/X11/Xsession.d/98vboxadd-xclient:
/usr/bin/VBoxClient: not found
/etc/gdm3/Xsession: 44: /etc/X11/Xsession.d/98vboxadd-xclient:
/usr/bin/VBoxClient: not found
/etc/gdm3/Xsession: 46: /etc/X11/Xsession.d/98vboxadd-xclient:
/usr/bin/VBoxClient: not found
/etc/gdm3/Xsession: 48: /etc/X11/Xsession.d/98vboxadd-xclient:
/usr/bin/VBoxClient: not found
ESTART: 0.00000 [0.00000] - Begin Startup
ESTART: 0.00009 [0.00009] - Signal Trap
ESTART: 0.00012 [0.00003] - Signal Trap Done
ESTART: 0.00103 [0.00091] - Eina Init
ESTART: 0.00147 [0.00045] - Eina Init Done
ESTART: 0.00149 [0.00001] - Determine Prefix
=================================
Enlightenment relocation handling
=================================
PREFIX: /opt/e17
BINDIR: /opt/e17/bin
LIBDIR: /opt/e17/lib
DATADIR: /opt/e17/share/enlightenment
LOCALE: /opt/e17/share/locale
=================================
ESTART: 0.00272 [0.00124] - Determine Prefix Done
ESTART: 0.00283 [0.00010] - Environment Variables
ESTART: 0.00288 [0.00006] - Environment Variables Done
ESTART: 0.00289 [0.00001] - Parse Arguments
ESTART: 0.00300 [0.00010] - Parse Arguments Done
ESTART: 0.00301 [0.00002] - Eet Init
ESTART: 0.00627 [0.00326] - Eet Init Done
ESTART: 0.00631 [0.00004] - Ecore Init
ESTART: 0.00663 [0.00032] - Ecore Init Done
ESTART: 0.00666 [0.00002] - Ecore Event Handlers
ESTART: 0.00667 [0.00001] - Ecore Event Handlers Done
ESTART: 0.00668 [0.00001] - Ecore_IMF Init
ESTART: 0.02628 [0.01960] - Ecore_IMF Init Done
ESTART: 0.02634 [0.00006] - Ecore_File Init
ESTART: 0.02754 [0.00119] - Ecore_File Init Done
ESTART: 0.02758 [0.00004] - Ecore_Con Init
ESTART: 0.02769 [0.00011] - Ecore_Con Init Done
ESTART: 0.02770 [0.00001] - Ecore_Ipc Init
ESTART: 0.02773 [0.00003] - Ecore_Ipc Init Done
ESTART: 0.02774 [0.00002] - Ecore_X Init
ESTART: 0.02776 [0.00001] - Ecore_X Init Done
ESTART: 0.02777 [0.00001] - Ecore_Evas Init
ESTART: 0.03015 [0.00238] - Ecore_Evas Init Done
ESTART: 0.03019 [0.00005] - Ecore_Evas Engine Check
ESTART: 0.03021 [0.00002] - Ecore_Evas Engine Check Done
ESTART: 0.03023 [0.00001] - Edje Init
ESTART: 0.03839 [0.00817] - Edje Init Done
ESTART: 0.03844 [0.00005] - E Intl Init
ESTART: 0.04021 [0.00177] - E Intl Init Done
ESTART: 0.04023 [0.00003] - E_Alert Init
ESTART: 0.04024 [0.00001] - E_Alert Init Done
ESTART: 0.04025 [0.00001] - E_Xinerama Init
E17 INIT: XINERAMA SCREEN: [0], 2560x1440+1920+0
E17 INIT: XINERAMA SCREEN: [1], 1920x1080+0+0
E17 INIT: XINERAMA CHOSEN: [1], 1920x1080+0+0
E17 INIT: XINERAMA CHOSEN: [0], 2560x1440+1920+0
ESTART: 0.04083 [0.00058] - E_Xinerama Init Done
ESTART: 0.04085 [0.00001] - E_Randr Init
E_RANDR: possible CRTC: 79
E_RANDR: possible CRTC: 0
E_RANDR: filling 1/2 (79)
Fillng CRTC 79 (0x1fb0fd0)
CRTC 79 apparently is in mode 84, trying to find it in the list of modes..
found CRTC 79 in mode 84
E_RANDR: filling 2/2 (0)
Fillng CRTC 0 (0x1fb1050)
CRTC 0 apparently is in mode -1, trying to find it in the list of modes..
ESTART: 0.04508 [0.00423] - E_Randr Init Done
ESTART: 0.04509 [0.00002] - E_Hints Init
ESTART: 0.04554 [0.00044] - E_Hints Init Done
ESTART: 0.04555 [0.00002] - E_Configure Init
ESTART: 0.04570 [0.00015] - E_Configure Init Done
ESTART: 0.04571 [0.00002] - E Directories Init
ESTART: 0.08359 [0.03787] - E Directories Init Done
ESTART: 0.08363 [0.00004] - E_Filereg Init
ESTART: 0.08451 [0.00089] - E_Filereg Init Done
ESTART: 0.08454 [0.00002] - E_Config Init
ESTART: 0.10170 [0.01716] - E_Config Init Done
ESTART: 0.10238 [0.00068] - E_Env Init
ESTART: 0.10241 [0.00003] - E_Env Init Done
ESTART: 0.10245 [0.00004] - E_Scale Init
ESTART: 0.10250 [0.00005] - E_Scale Init Done
ESTART: 0.10251 [0.00001] - E_Pointer Init
ESTART: 0.10254 [0.00002] - E_Pointer Init Done
ESTART: 0.10255 [0.00001] - E Paths Init
ESTART: 0.10263 [0.00008] - E Paths Init Done
ESTART: 0.10264 [0.00001] - E_Ipc Init
INFO: E_IPC_SOCKET=/tmp/enlightenment-jschrod/disp-:0.0-2041
ESTART: 0.10305 [0.00041] - E_Ipc Init Done
ESTART: 0.10308 [0.00003] - E_Font Init
ESTART: 0.10399 [0.00091] - E_Font Init Done
ESTART: 0.10403 [0.00004] - E_Font Apply
ESTART: 0.10406 [0.00002] - E_Font Apply Done
ESTART: 0.10407 [0.00001] - E_Canvas Recache
ESTART: 0.10414 [0.00008] - E_Canvas Recache Done
ESTART: 0.10416 [0.00001] - E_Theme Init
ESTART: 0.10424 [0.00008] - E_Theme Init Done
ESTART: 0.10425 [0.00001] - E_Moveresize Init
ESTART: 0.10427 [0.00002] - E_Moveresize Init Done
ESTART: 0.10428 [0.00001] - E_Splash Init
ESTART: 0.10430 [0.00002] - E_Splash Init Done
RUN INIT: /opt/e17/lib/enlightenment/utils/enlightenment_init
'/opt/e17/share/enlightenment/data/themes/default.edj' '1' '0' 'Enlightenment'
'0.16.999.65362'
ESTART: 0.60218 [0.49789] - E_Intl Post Init
ESTART: 0.61035 [0.00817] - E_Intl Post Init Done
ESTART: 0.61041 [0.00006] - Efreet Init
ESTART: 0.73325 [0.12284] - Efreet Init Done
ESTART: 0.73330 [0.00006] - Test File Format Support
ESTART: 0.83306 [0.09975] - Test File Format Support Done
ESTART: 0.83311 [0.00005] - Screens Init
ESTART: 0.83311 [0.00000] - screens: atoms
ESTART: 0.83335 [0.00024] - screens: manager
ESTART: 0.83337 [0.00002] - screens: container
ESTART: 0.83338 [0.00001] - screens: zone
ESTART: 0.83339 [0.00001] - screens: desk
ESTART: 0.83339 [0.00001] - screens: menu
ESTART: 0.83340 [0.00001] - screens: exehist
ESTART: 0.83341 [0.00001] - screens: get roots
ESTART: 0.83341 [0.00000] - screens: focus
ESTART: 0.83342 [0.00000] - screens: border
ESTART: 0.83345 [0.00003] - screens: win
ESTART: 0.83345 [0.00001] - screens: manage roots
ESTART: 0.89499 [0.06154] - screens: sync
ESTART: 0.89522 [0.00023] - Screens Init Done
ESTART: 0.89525 [0.00003] - E_Acpi Init
ESTART: 0.89540 [0.00015] - E_Acpi Init Done
ESTART: 0.89543 [0.00003] - E_Backlight Init
ESTART: 0.89830 [0.00287] - E_Backlight Init Done
ESTART: 0.89836 [0.00006] - E_Dpms Init
ESTART: 0.89854 [0.00017] - E_Dpms Init Done
ESTART: 0.89856 [0.00002] - E_Screensaver Init
ESTART: 0.89890 [0.00033] - E_Screensaver Init Done
ESTART: 0.89893 [0.00004] - E_Powersave Init
ESTART: 0.89895 [0.00002] - E_Powersave Init Done
ESTART: 0.89897 [0.00002] - E_Desklock Init
ESTART: 0.89903 [0.00006] - E_Desklock Init Done
ESTART: 0.89905 [0.00002] - E_Popups Init
ESTART: 0.89907 [0.00001] - E_Popups Init Done
ESTART: 0.89908 [0.00002] - E_Msgbus Init
ESTART: 0.90082 [0.00173] - E_Msgbus Init Done
ESTART: 0.90086 [0.00005] - Efreet Paths
ESTART: 0.90089 [0.00002] - Efreet Paths Done
ESTART: 0.90090 [0.00002] - E_Sys Init
ESTART: 0.90096 [0.00006] - E_Sys Init Done
ESTART: 0.90099 [0.00003] - E_Actions Init
ESTART: 0.90168 [0.00069] - E_Actions Init Done
ESTART: 0.90170 [0.00002] - E_Exec Init
ESTART: 0.90172 [0.00002] - E_Exec Init Done
ESTART: 0.90173 [0.00001] - E_Container Freeze
ESTART: 0.90175 [0.00002] - E_Container Freeze Done
ESTART: 0.90176 [0.00002] - E_Fm2 Init
ESTART: 1.01461 [0.11285] - E_Fm2 Init Done
ESTART: 1.01469 [0.00008] - E_Msg Init
ESTART: 1.01471 [0.00002] - E_Msg Init Done
ESTART: 1.01473 [0.00002] - E_Dnd Init
ESTART: 1.01476 [0.00003] - E_Dnd Init Done
ESTART: 1.01478 [0.00002] - E_Grabinput Init
ESTART: 1.01479 [0.00001] - E_Grabinput Init Done
ESTART: 1.01480 [0.00001] - E_Module Init
ESTART: 1.01481 [0.00001] - E_Module Init Done
ESTART: 1.01483 [0.00002] - E_Remember Init
ESTART: 1.03979 [0.02495] - E_Remember Init Done
ESTART: 1.03985 [0.00007] - E_Color_Class Init
ESTART: 1.03987 [0.00001] - E_Color_Class Init Done
ESTART: 1.03988 [0.00002] - E_Gadcon Init
ESTART: 1.03990 [0.00002] - E_Gadcon Init Done
ESTART: 1.03996 [0.00006] - E_Bg Init
ESTART: 1.04004 [0.00007] - E_Bg Init Done
ESTART: 1.04005 [0.00002] - E_Mouse Init
ESTART: 1.04026 [0.00021] - E_Mouse Init Done
ESTART: 1.04028 [0.00002] - E_Bindings Init
ESTART: 1.04059 [0.00031] - E_Bindings Init Done
ESTART: 1.04061 [0.00002] - E_Shelf Init
ESTART: 1.04062 [0.00001] - E_Shelf Init Done
ESTART: 1.04064 [0.00001] - E_Thumb Init
ESTART: 1.04066 [0.00002] - E_Thumb Init Done
ESTART: 1.04067 [0.00001] - E_Icon Init
ESTART: 1.04068 [0.00001] - E_Thumb Init Done
ESTART: 1.04069 [0.00001] - E_XSettings Init
add Net/IconThemeName oxygen
ESTART: 1.04214 [0.00145] - E_XSettings Init Done
ESTART: 1.04220 [0.00006] - E_Deskenv Init
ESTART: 1.04221 [0.00001] - E_Deskenv Init Done
ESTART: 1.04223 [0.00002] - E_Order Init
ESTART: 1.04228 [0.00005] - E_Order Init Done
ESTART: 1.04229 [0.00001] - Add Idler For X Flush
ESTART: 1.04231 [0.00001] - Add Idler For X Flush Done
ESTART: 1.04232 [0.00001] - E_Manager Keys Grab
ESTART: 1.04259 [0.00027] - E_Manager Keys Grab Done
ESTART: 1.04261 [0.00002] - Load Modules
found composite manager
CRI<2041>:pulse pa.c:681 pulse_new() could not locate local socket
'/var/run/pulse/native'!
ESTART: 1.88757 [0.84495] - Load Modules Done
ESTART: 1.88763 [0.00007] - Run Startup Apps
ESTART: 1.89778 [0.01015] - Run Startup Apps Done
ESTART: 1.89789 [0.00011] - E_Container Thaw
ESTART: 1.89796 [0.00008] - E_Container Thaw Done
ESTART: 1.89798 [0.00002] - E_Test Init
ESTART: 1.89799 [0.00001] - E_Test Done
ESTART: 1.89804 [0.00004] - E_Shelf Config Update
ESTART: 1.91291 [0.01487] - E_Shelf Config Update Done
ESTART: 1.91303 [0.00012] - Manage all windows
ESTART: 1.91769 [0.00466] - MAIN LOOP AT LAST
ESTART: 2.17126 [0.25357] - SLEEP
Conky: desktop window (a00003) is subwindow of root window (15e)
Conky: window type - desktop
Conky: drawing to created window (0x1200002)
Conky: drawing to double buffer
ALSA lib control.c:882:(snd_ctl_open_noupdate) Invalid CTL
alsa_output.pci-0000_02_00.1.hdmi-stereo
MIXER: Cannot get hardware info: No such file or directory
E17 INIT: XINERAMA SCREEN: [0], 2560x1440+1920+0
E17 INIT: XINERAMA SCREEN: [1], 1920x1080+0+0
E17 INIT: XINERAMA CHOSEN: [1], 1920x1080+0+0
E17 INIT: XINERAMA CHOSEN: [0], 2560x1440+1920+0
INF<2144>:eeze_disk eeze_disk_libmount.c:60 _eeze_mount_lock_mtab()
Insufficient privs for mtab lock, continuing without lock
INF<2144>:efm e_fm_main_eeze.c:703 _e_fm_main_eeze_init() Socket file
'/tmp/.ecore_service|eeze_scanner|0' for eeze_scanner does not exist,
attempting to start...
INF<2144>:efm e_fm_main_eeze.c:555 _scanner_add() Scanner started
ERR<2041>:edje edje_program.c:458 _edje_program_run() Programs recursing up to
recursion limit of 64. Disabled.
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
INF<2145>:eeze_scanner eeze_scanner.c:344 cb_stor_chg() Added device
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:339 cb_stor_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc'
DBG<2145>:eeze_scanner eeze_scanner.c:296 cb_vol_chg()
device='/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc/sdc1'
INF<2145>:eeze_scanner eeze_scanner.c:306 cb_vol_chg() Added volume
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/host7/target7:0:0/7:0:0:0/block/sdc/sdc1'
------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure
contains a definitive record of customers, application performance,
security threats, fraudulent activity, and more. Splunk takes this
data and makes sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-novd2d
_______________________________________________
enlightenment-devel mailing list
enlightenment-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-devel
