Hi Leif,
File attached. Thanks!
/etc/gdm/Xsession: Beginning session setup...
localuser:michael being added to access control list
ESTART: 0.00000 [0.00000] - Begin Startup
ESTART: 0.00006 [0.00006] - Signal Trap
ESTART: 0.00007 [0.00001] - Signal Trap Done
ESTART: 0.00590 [0.00583] - Eina Init
ESTART: 0.00612 [0.00022] - Eina Init Done
ESTART: 0.00613 [0.00000] - Determine Prefix
=================================
Enlightenment relocation handling
=================================
PREFIX: /usr/local
BINDIR: /usr/local/bin
LIBDIR: /usr/local/lib
DATADIR: /usr/local/share/enlightenment
LOCALE: /usr/local/share/locale
=================================
ESTART: 0.01439 [0.00826] - Determine Prefix Done
ESTART: 0.01443 [0.00004] - Environment Variables
ESTART: 0.01444 [0.00002] - Environment Variables Done
ESTART: 0.01444 [0.00000] - Parse Arguments
ESTART: 0.01445 [0.00001] - Parse Arguments Done
ESTART: 0.01445 [0.00000] - Eet Init
ESTART: 0.01557 [0.00112] - Eet Init Done
ESTART: 0.01559 [0.00002] - Ecore Init
ESTART: 0.01578 [0.00019] - Ecore Init Done
ESTART: 0.01578 [0.00001] - Ecore Event Handlers
ESTART: 0.01579 [0.00000] - Ecore Event Handlers Done
ESTART: 0.01579 [0.00000] - Ecore_File Init
ESTART: 0.01599 [0.00020] - Ecore_File Init Done
ESTART: 0.01599 [0.00000] - Ecore_Con Init
ESTART: 0.01603 [0.00004] - Ecore_Con Init Done
ESTART: 0.01603 [0.00000] - Ecore_Ipc Init
ESTART: 0.01603 [0.00001] - Ecore_Ipc Init Done
ESTART: 0.01604 [0.00001] - Ecore_X Init
ESTART: 0.01948 [0.00344] - Ecore_X Init Done
ESTART: 0.01955 [0.00006] - Ecore_IMF Init
ESTART: 0.13476 [0.11522] - Ecore_IMF Init Done
ESTART: 0.13479 [0.00002] - Ecore_Evas Init
ESTART: 0.15923 [0.02444] - Ecore_Evas Init Done
ESTART: 0.15925 [0.00002] - Ecore_Evas Engine Check
ESTART: 0.15925 [0.00000] - Ecore_Evas Engine Check Done
ESTART: 0.15926 [0.00000] - Edje Init
ESTART: 0.16011 [0.00086] - Edje Init Done
ESTART: 0.16014 [0.00002] - E Intl Init
ESTART: 0.16142 [0.00128] - E Intl Init Done
ESTART: 0.16144 [0.00002] - E_Alert Init
ESTART: 0.16144 [0.00000] - E_Alert Init Done
ESTART: 0.16144 [0.00000] - E_Xinerama Init
E17 INIT: XINERAMA SCREEN: [0], 1920x1080+0+0
E17 INIT: XINERAMA CHOSEN: [0], 1920x1080+0+0
ESTART: 0.16175 [0.00031] - E_Xinerama Init Done
ESTART: 0.16175 [0.00000] - E_Hints Init
ESTART: 0.16252 [0.00076] - E_Hints Init Done
ESTART: 0.16253 [0.00001] - E_Configure Init
ESTART: 0.16262 [0.00009] - E_Configure Init Done
ESTART: 0.16263 [0.00000] - E Directories Init
ESTART: 0.19778 [0.03515] - E Directories Init Done
ESTART: 0.19780 [0.00002] - E_Filereg Init
ESTART: 0.19873 [0.00093] - E_Filereg Init Done
ESTART: 0.19875 [0.00002] - E_Config Init
ESTART: 0.22712 [0.02837] - E_Config Init Done
ESTART: 0.22736 [0.00025] - E_Randr Init
E_RANDR: filling 1/6 (79)
E_RANDR: Filling CRTC 79 (0x1352380)
E_RANDR: CRTC 4f apparently is in mode 64, trying to find it in the
list of modes..
E_RANDR: filling 2/6 (0)
E_RANDR: Filling CRTC 0 (0x1352400)
E_RANDR: CRTC 0 apparently is in mode ffffffff, trying to find it in
the list of modes..
E_RANDR: filling 3/6 (80)
E_RANDR: Filling CRTC 80 (0x1352480)
E_RANDR: CRTC 50 apparently is in mode 0, trying to find it in the list
of modes..
E_RANDR: filling 4/6 (0)
E_RANDR: Filling CRTC 0 (0x1352500)
E_RANDR: CRTC 0 apparently is in mode ffffffff, trying to find it in
the list of modes..
E_RANDR: filling 5/6 (81)
E_RANDR: Filling CRTC 81 (0x1352580)
E_RANDR: CRTC 51 apparently is in mode 0, trying to find it in the list
of modes..
E_RANDR: filling 6/6 (0)
E_RANDR: Filling CRTC 0 (0x1352600)
E_RANDR: CRTC 0 apparently is in mode ffffffff, trying to find it in
the list of modes..
ERR<2883>: e_randr.c:1678 _e_randr_restore_12_policies() safety check failed:
e_config->randr_serialized_setup == NULL
ESTART: 0.22927 [0.00190] - E_Randr Init Done
ESTART: 0.22927 [0.00001] - E_Env Init
ESTART: 0.22928 [0.00000] - E_Env Init Done
ESTART: 0.22929 [0.00001] - E_Scale Init
ESTART: 0.22930 [0.00001] - E_Scale Init Done
ESTART: 0.22930 [0.00000] - E_Pointer Init
ESTART: 0.22931 [0.00000] - E_Pointer Init Done
ESTART: 0.22931 [0.00000] - E Paths Init
ESTART: 0.22934 [0.00003] - E Paths Init Done
ESTART: 0.22935 [0.00000] - E_Ipc Init
INFO: E_IPC_SOCKET=/tmp/enlightenment-michael/disp-:0.0-2883
ESTART: 0.22949 [0.00015] - E_Ipc Init Done
ESTART: 0.22950 [0.00001] - E_Font Init
ESTART: 0.22950 [0.00000] - E_Font Init Done
ESTART: 0.22950 [0.00000] - E_Font Apply
ESTART: 0.22953 [0.00003] - E_Font Apply Done
ESTART: 0.22953 [0.00000] - E_Canvas Recache
ESTART: 0.22954 [0.00001] - E_Canvas Recache Done
ESTART: 0.22954 [0.00000] - E_Theme Init
ESTART: 0.23009 [0.00055] - E_Theme Init Done
ESTART: 0.23010 [0.00001] - E_Moveresize Init
ESTART: 0.23027 [0.00017] - E_Moveresize Init Done
ESTART: 0.23027 [0.00000] - E_Splash Init
ESTART: 0.23028 [0.00001] - E_Splash Init Done
RUN INIT: /usr/local/lib/enlightenment/utils/enlightenment_init
'/usr/local/share/enlightenment/data/themes/default.edj' '0' 'Enlightenment'
'0.16.999.68113'
ESTART: 0.81218 [0.58191] - E_Intl Post Init
ESTART: 0.87600 [0.06382] - E_Intl Post Init Done
ESTART: 0.87602 [0.00002] - Efreet Init
ESTART: 1.63677 [0.76075] - Efreet Init Done
ESTART: 1.63681 [0.00004] - Test File Format Support
ESTART: 1.79609 [0.15928] - Test File Format Support Done
ESTART: 1.79615 [0.00007] - Screens Init
ESTART: 1.79616 [0.00001] - screens: atoms
ESTART: 1.79662 [0.00046] - screens: manager
ESTART: 1.79682 [0.00020] - screens: container
ESTART: 1.79686 [0.00004] - screens: zone
ESTART: 1.79687 [0.00002] - screens: desk
ESTART: 1.79688 [0.00001] - screens: menu
ESTART: 1.79690 [0.00002] - screens: exehist
ESTART: 1.79692 [0.00002] - screens: get roots
ESTART: 1.79693 [0.00001] - screens: focus
ESTART: 1.79694 [0.00001] - screens: border
ESTART: 1.79697 [0.00003] - screens: win
ESTART: 1.79698 [0.00001] - screens: manage roots
@@@@@@@@@@ e_zone_new: 0 0 | 0 0 1920x1080 = 0x13ca830
ESTART: 1.85581 [0.05883] - screens: sync
ESTART: 1.85662 [0.00081] - Screens Init Done
ESTART: 1.85673 [0.00011] - E_Acpi Init
ESTART: 1.85695 [0.00022] - E_Acpi Init Done
ESTART: 1.85697 [0.00002] - E_Backlight Init
ESTART: 1.86195 [0.00498] - E_Backlight Init Done
ESTART: 1.86201 [0.00006] - E_Dpms Init
ESTART: 1.86291 [0.00090] - E_Dpms Init Done
ESTART: 1.86298 [0.00008] - E_Screensaver Init
ESTART: 1.86424 [0.00126] - E_Screensaver Init Done
ESTART: 1.86432 [0.00008] - E_Powersave Init
ESTART: 1.86433 [0.00001] - E_Powersave Init Done
ESTART: 1.86434 [0.00001] - E_Desklock Init
ESTART: 1.86437 [0.00003] - E_Desklock Init Done
ESTART: 1.86438 [0.00001] - E_Popups Init
ESTART: 1.86440 [0.00001] - E_Popups Init Done
ESTART: 1.86441 [0.00001] - E_Msgbus Init
ESTART: 1.86655 [0.00214] - E_Msgbus Init Done
ESTART: 1.86662 [0.00007] - Efreet Paths
ESTART: 1.86664 [0.00002] - Efreet Paths Done
ESTART: 1.86665 [0.00001] - E_Sys Init
ESTART: 1.86667 [0.00002] - E_Sys Init Done
ESTART: 1.86668 [0.00001] - E_Actions Init
ESTART: 1.86767 [0.00098] - E_Actions Init Done
ESTART: 1.86769 [0.00002] - E_Exec Init
ESTART: 1.86770 [0.00001] - E_Exec Init Done
ESTART: 1.86770 [0.00001] - E_Container Freeze
ESTART: 1.86771 [0.00001] - E_Container Freeze Done
ESTART: 1.86772 [0.00001] - E_Fm2 Init
ESTART: 1.90589 [0.03817] - E_Fm2 Init Done
ESTART: 1.90596 [0.00006] - E_Msg Init
ESTART: 1.90597 [0.00001] - E_Msg Init Done
ESTART: 1.90598 [0.00001] - E_Dnd Init
ESTART: 1.90602 [0.00004] - E_Dnd Init Done
ESTART: 1.90603 [0.00001] - E_Grabinput Init
ESTART: 1.90604 [0.00001] - E_Grabinput Init Done
ESTART: 1.90605 [0.00001] - E_Module Init
ESTART: 1.90606 [0.00001] - E_Module Init Done
ESTART: 1.90607 [0.00001] - E_Remember Init
ESTART: 1.92356 [0.01749] - E_Remember Init Done
ESTART: 1.92363 [0.00007] - E_Color_Class Init
ESTART: 1.92364 [0.00001] - E_Color_Class Init Done
ESTART: 1.92365 [0.00001] - E_Gadcon Init
ESTART: 1.92366 [0.00001] - E_Gadcon Init Done
ESTART: 1.92367 [0.00001] - E_Bg Init
ESTART: 1.92374 [0.00007] - E_Bg Init Done
ESTART: 1.92375 [0.00001] - E_Mouse Init
ESTART: 1.92396 [0.00021] - E_Mouse Init Done
ESTART: 1.92403 [0.00007] - E_Bindings Init
ESTART: 1.92449 [0.00047] - E_Bindings Init Done
ESTART: 1.92451 [0.00002] - E_Shelf Init
ESTART: 1.92452 [0.00001] - E_Shelf Init Done
ESTART: 1.92453 [0.00001] - E_Thumb Init
ESTART: 1.92454 [0.00001] - E_Thumb Init Done
ESTART: 1.92455 [0.00001] - E_Icon Init
ESTART: 1.92455 [0.00001] - E_Thumb Init Done
ESTART: 1.92455 [0.00000] - E_XSettings Init
add Net/IconThemeName gnome
ESTART: 1.95578 [0.03123] - E_XSettings Init Done
ESTART: 1.95584 [0.00006] - E_Update Init
ESTART: 1.95586 [0.00002] - E_Update Init Done
ESTART: 1.95589 [0.00003] - E_Deskenv Init
ESTART: 1.95942 [0.00353] - E_Deskenv Init Done
ESTART: 1.95947 [0.00006] - E_Order Init
ESTART: 1.97830 [0.01883] - E_Order Init Done
<<<< Enlightenment Error >>>>
WARNING: too many init levels. MAX = 55
ESTART: 1.97833 [0.00003] - Add Idler For X Flush
ESTART: 1.97834 [0.00001] - Add Idler For X Flush Done
ESTART: 1.97834 [0.00000] - E_Manager Keys Grab
ESTART: 1.97849 [0.00015] - E_Manager Keys Grab Done
ESTART: 1.97851 [0.00002] - Load Modules
MODULE ERR:
There was an error loading module named: itask<br>No module named
itask/linux-gnu-x86_64-ver-pre-svn-08/module.so could be found in the<br>module
search directories.<br>
ESTART: 2.82496 [0.84645] - Load Modules Done
ESTART: 2.82501 [0.00006] - Run Startup Apps
ESTART: 2.83859 [0.01357] - Run Startup Apps Done
ESTART: 2.83862 [0.00004] - E_Container Thaw
ESTART: 2.83863 [0.00001] - E_Container Thaw Done
ESTART: 2.83864 [0.00000] - E_Test Init
ESTART: 2.83864 [0.00000] - E_Test Done
ESTART: 2.83866 [0.00002] - E_Shelf Config Update
ESTART: 2.89186 [0.05320] - E_Shelf Config Update Done
ESTART: 2.89188 [0.00002] - Manage all windows
ESTART: 2.89422 [0.00234] - MAIN LOOP AT LAST
ESTART: 3.24665 [0.35243] - SLEEP
CRI<3051>: eina_iterator.c:98 eina_iterator_free() *** Eina Magic Check Failed
!!!
Input handle pointer is NULL !
*** NAUGHTY PROGRAMMER!!!
*** SPANK SPANK SPANK!!!
*** Now go fix your code. Tut tut tut!
ERR<3051>: eina_iterator.c:99 eina_iterator_free() safety check failed:
iterator == NULL
E17 INIT: XINERAMA SCREEN: [0], 1920x1080+0+0
E17 INIT: XINERAMA CHOSEN: [0], 1920x1080+0+0
On Feb 21, 2012, at 2:11 PM, Leif Middelschulte wrote:
> Hi mike,
>
> thanks for your report.
>
> 2012/2/21 mh <mhe...@member.fsf.org>:
>> I think there is again a problem with e_randr since after r.68113. Beginning
>> with r. 68114 I am seeing the same problem that r.66638 I think fixed. I'm
>> including the original emails about this below. I noticed from trac that
>> 68114 was a lot of work done to e_randr so I suspect this is the problem.
>>
>> I have a Radeon 5770 card, and the earlier problem seemed to be with at
>> least ATI 5770/5750 series graphics cards. X starts and shows GKrellM is
>> working, but Enlightenment does not start properly.
>>
>> What can I do to help? Thanks.
>
> Could you send the output of stderr e.g. ~/.xsessrion-errors please?
>>
>> mike
>>
>>
>>> On Dec 29, 2011, at 1:30 PM, Leif Middelschulte wrote:
>>>
>>>> 2011/12/28 Leif Middelschulte <leif.middelschu...@gmail.com>:
>>>>>
>>>>> Hi Mike,
>>>>>
>>>>> thanks your effort. The backtraces look promising.
>>>>>
>>>>> I'll have a look soon and hope to be able to fix this issue.
>>>>>
>>>> I hope it's fixed now :-)
>>>
>>>
>>> Perfect! Thanks very much Leif!
>>>
>>> mike
>>>
>>>
>>>>> Am 27.12.2011 um 14:42 schrieb mh <mhe...@member.fsf.org>:
>>>>>
>>>>>> I learned how to record the gdb session. The attached gdb sessions may
>>>>>> provide more useful information. One gdb session run as root, the other
>>>>>> as
>>>>>> user. Ran to break, then stepped through. Hope this helps.
>>>>>>
>>>>>> mike
>>>>>>
>>>>>> <e-log-root.txt>
>>>>>> <e-log.txt>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> On Dec 25, 2011, at 11:49 AM, Leif Middelschulte wrote:
>>>>>>>
>>>>>>>> Hi Mike,
>>>>>>>>
>>>>>>>> sorry for this late reply, but am kept busy with rl.
>>>>>>>> Find comments in their respective context.
>>>>>>>>
>>>>>>>> 2011/12/24 mh <mhe...@member.fsf.org>:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>>> On Dec 23, 2011, at 12:27 PM, Leif Middelschulte wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> 2011/12/23 mh <mhe...@member.fsf.org>:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Salute:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'm having the same issue using two different distros on the same
>>>>>>>>>>>>>> hardware (two drives).
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> When I'm running Arch, I'm running xorg-server 1.11.3-1 , using
>>>>>>>>>>>>>> xf86-video-ati 6.14.3-1
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Debian, sid, I have xserver-xorg-core 1.11.2.902-1, using
>>>>>>>>>>>>>> xserver-xorg-video-radeon 6.14.3-2
>>>>>>>>>>>>>>
>>>>>>>>>>>>> I'd like you to start e via gdb (compile e with debugging symbols,
>>>>>>>>>>>>> see
>>>>>>>>>>>>> our wiki). Then break on _e_randr_crtc_info_set and step through
>>>>>>>>>>>>> that
>>>>>>>>>>>>> function until bad things (crash) happens.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Will do and let you know what I find here.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Ok, I installed gdb, downloaded the latest 66482 from svn. Followed
>>>>>>>>>>> the wiki
>>>>>>>>>>> and rebuilt the EFLs after export CFLAG=-g. Now I'm stuck. From the
>>>>>>>>>>> wiki it
>>>>>>>>>>> seems that I should start e, then when it crashes start gdb and
>>>>>>>>>>> break
>>>>>>>>>>> on
>>>>>>>>>>> _e_randr_crtc_info_set. Not sure how to do that. Help appreciated.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Dec 23, 2011, at 9:41 PM, Carsten Haitzler (The Rasterman) wrote:
>>>>>>>>>>
>>>>>>>>>> you're going to need to start an xserver raw without any "gdm".
>>>>>>>>>>
>>>>>>>>>> Xorg -ac :1 &
>>>>>>>>>>
>>>>>>>>>> run that in a text console somewhere.
>>>>>>>>>> in another text console do:
>>>>>>>>>>
>>>>>>>>>> export E_START=1
>>>>>>>>>> gdb enlightenment
>>>>>>>>
>>>>>>>> Thanks to raster for helping out here :-)
>>>>>>>> But shouldn't this be
>>>>>>>> gdb enlightenment_start instead?
>>>>>>>>>>
>>>>>>>>>> br _e_randr_crtc_info_set
>>>>>>>>>> r
>>>>>>>>>>
>>>>>>>>>>> But, e never crashes though. What happens is that I'll run startx
>>>>>>>>>>> from vt1,
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> it won't - you have to make it STOP when it hits that function with a
>>>>>>>>>> breakpoint (br). you have to set it up before e starts like above.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks! Attached are three sequential console shots, after hitting the
>>>>>>>>> breakpoint three times . These seem to look exactly the messages I saw
>>>>>>>>> earlier.
>>>>>>>>
>>>>>>>>
>>>>>>>> Sadly you did something wrong when trying to run e via gdb. Ecore_X
>>>>>>>> fails to initialize, which is way before e_randr initialization.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>> and then in vt1 there are a series of messages like I included
>>>>>>>>>>> earlier in the
>>>>>>>>>>> file called "start-results". The messages say "Enlightenment
>>>>>>>>>>> relocation
>>>>>>>>>>> handling", then many ESTART messages, then "Enlighenment relocation
>>>>>>>>>>> handling"
>>>>>>>>>>> again, followed by the same ESTART messages, then "<Enlightenment
>>>>>>>>>>> Error> A
>>>>>>>>>>> previous instance of Enlightenment is still active on this screen.
>>>>>>>>>>> Aborting
>>>>>>>>>>> startup." And then it repeats this process over and over until
>>>>>>>>>>> there's a
>>>>>>>>>>> final error and X shuts down.
>>>>>>>>>>>
>>>>>>>>>>> So there doesn't seem to be a PID of enlightenment to run gdb on. I
>>>>>>>>>>> guess.
>>>>>>>>>>> I've never really run gdb before.
>>>>>>>>>>>
>>>>>>>>>>> Any suggestions/hints would be appreciated, I'm willing to try and
>>>>>>>>>>> help track
>>>>>>>>>>> down the problem with this damn ATI hardware.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> mike
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Dec 23, 2011, at 3:52 AM, Andrea Suisani wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi all,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> sorry for not being able to join
>>>>>>>>>>>>>>> the irc debug session last evening...
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> though it seems we have have narrowed
>>>>>>>>>>>>>>> the problem down to a peculiar comibination
>>>>>>>>>>>>>>> of HW (ATI HD 5770/5750), e17 ver,
>>>>>>>>>>>>>>> xorg version and x org drivere version.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> just trying get a more clear picture
>>>>>>>>>>>>>>> I'm running X.Org X Server 1.10.4
>>>>>>>>>>>>>>> with fglrx used as video driver (defined
>>>>>>>>>>>>>>> in xorg.conf) installed using
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> apt-get install fglrx-updates
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> on an ubuntu box ver 11.10, that's
>>>>>>>>>>>>>>> the output of uname -a:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Linux suino 3.0.0-14-server #23-Ubuntu SMP Mon Nov 21 20:49:05
>>>>>>>>>>>>>>> UTC 2011
>>>>>>>>>>>>>>> x86_64 x86_64 x86_64 GNU/Linux
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Mike what's your xorg version and
>>>>>>>>>>>>>>> which driver are you using for your
>>>>>>>>>>>>>>> 5770?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I'm going to try to configure my Xorg
>>>>>>>>>>>>>>> dropping the binary only driver and using
>>>>>>>>>>>>>>> instead the one provided by:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> xserver-xorg-video-radeon
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> i.e.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> http://www.x.org/wiki/radeon
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I'll report back
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Andrea
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On 12/22/2011 08:49 PM, mh wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Leif,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Following up on our irc session today: I
>>>>>>>>>>>>>>>> deleted /opt/e17/lib/enlightenment/conf_randr and restarted e.
>>>>>>>>>>>>>>>> Still
>>>>>>>>>>>>>>>> had the black screen with gkrellm.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Decided to try something else: I took the 5770 video card out
>>>>>>>>>>>>>>>> of the
>>>>>>>>>>>>>>>> box and tried the onboard video, which is a Radeon HD 4200.
>>>>>>>>>>>>>>>> Restarted
>>>>>>>>>>>>>>>> e, and the display worked properly. Recompiled e to rev 66466,
>>>>>>>>>>>>>>>> and it
>>>>>>>>>>>>>>>> worked fine. Shutdown, the reinstalled the Radeon HD 5770 based
>>>>>>>>>>>>>>>> video
>>>>>>>>>>>>>>>> card and restarted, back to a black display with gkrellm still
>>>>>>>>>>>>>>>> working.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> So, from there I went back to the vt and recompiled e from v.
>>>>>>>>>>>>>>>> 66218 and
>>>>>>>>>>>>>>>> restarted e. Display and system worked fine. So that's where
>>>>>>>>>>>>>>>> I'm
>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>> right now.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> mike
>
>
>
> --
> Leif
>
> ------------------------------------------------------------------------------
> Keep Your Developer Skills Current with LearnDevNow!
> The most comprehensive online learning library for Microsoft developers
> is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
> Metro Style Apps, more. Free future releases when you subscribe now!
> http://p.sf.net/sfu/learndevnow-d2d
> _______________________________________________
> enlightenment-devel mailing list
> enlightenment-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/enlightenment-devel
------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
enlightenment-devel mailing list
enlightenment-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-devel