Hi, Ok, here is a screenshot which shows the problem with acroread print dialog. http://omploader.org/vcjc0
I just created a new profile and disabled *all* modules, except the configuration modules. Moreover, it is running in Xnest so composite is also not being used. Finally, e17 was compiled from svn just about 2-3 hours ago. The following is the information showed by xwininfo on the print dialog before I print anything: xwininfo: Window id: 0x8004b2 "Print" Absolute upper-left X: 225 Absolute upper-left Y: 464 Relative upper-left X: 0 Relative upper-left Y: 0 Width: 624 Height: 645 Depth: 24 Visual Class: TrueColor Border width: 0 Class: InputOutput Colormap: 0x2a (installed) Bit Gravity State: NorthWestGravity Window Gravity State: NorthWestGravity Backing Store State: NotUseful Save Under State: no Map State: IsViewable Override Redirect State: no Corners: +225+464 -411+464 -411--322 +225--322 -geometry 624x645+221+440 The following is the information showed by xwininfo after it becomes a ghost window: xwininfo: Window id: 0x2000b6 (has no name) Absolute upper-left X: 312 Absolute upper-left Y: 435 Relative upper-left X: 312 Relative upper-left Y: 435 Width: 632 Height: 673 Depth: 24 Visual Class: TrueColor Border width: 0 Class: InputOutput Colormap: 0x2a (installed) Bit Gravity State: NorthWestGravity Window Gravity State: NorthWestGravity Backing Store State: NotUseful Save Under State: no Map State: IsViewable Override Redirect State: yes Corners: +312+435 -316+435 -316--321 +312--321 -geometry 632x673+312+435 This is a relevant portion of e output (I launched acroread from this urxvtc terminal): child exit... tag E/exec inst = 0x835d880 inst exec line -- 'urxvtc -g 80x40' bd->want_focus = 0 ...caches flushed. bd->want_focus = 0 == e_desk_last_focused_focus LAST 0x8681c60 ic=0 vis=0 desk=0x82a56c0==0x82a56c0 LAST 0x8815618 ic=0 vis=1 desk=0x82a56c0==0x82a56c0 bd->want_focus = 0 == e_desk_last_focused_focus LAST 0x8681c60 ic=0 vis=0 desk=0x82a56c0==0x82a56c0 LAST 0x8815618 ic=0 vis=1 desk=0x82a56c0==0x82a56c0 ...caches flushed. bd->want_focus = 0 bd->want_focus = 0 E2 ...caches flushed. == e_desk_last_focused_focus LAST 0x880b9e8 ic=0 vis=0 desk=0x82a56c0==0x82a56c0 LAST 0x8815618 ic=0 vis=1 desk=0x82a56c0==0x82a56c0 bd->want_focus = 0 bd->want_focus = 0 == e_desk_last_focused_focus LAST 0x8815618 ic=0 vis=1 desk=0x82a56c0==0x82a56c0 ...caches flushed. == e_desk_last_focused_focus LAST 0x8815618 ic=0 vis=1 desk=0x82a56c0==0x82a56c0 FIXME: NO MORE CONTAINER FAKE UP! MUST REMOVE CODE FIXME: NO MORE FAKE UP! MUST REMOVE CODE FIXME: NO MORE CONTAINER FAKE UP! MUST REMOVE CODE FIXME: NO MORE FAKE UP! MUST REMOVE CODE FIXME: NO MORE CONTAINER FAKE UP! MUST REMOVE CODE FIXME: NO MORE FAKE UP! MUST REMOVE CODE == e_desk_last_focused_focus LAST 0x8815618 ic=0 vis=1 desk=0x82a56c0==0x82a1860 LAST 0x848efd8 ic=0 vis=1 desk=0x82a56c0==0x82a1860 LAST 0x8454700 ic=0 vis=0 desk=0x82a56c0==0x82a1860 FIXME: NO MORE CONTAINER FAKE UP! MUST REMOVE CODE FIXME: NO MORE FAKE UP! MUST REMOVE CODE FIXME: NO MORE CONTAINER FAKE UP! MUST REMOVE CODE FIXME: NO MORE FAKE UP! MUST REMOVE CODE FIXME: NO MORE CONTAINER FAKE UP! MUST REMOVE CODE FIXME: NO MORE FAKE UP! MUST REMOVE CODE == e_desk_last_focused_focus LAST 0x8815618 ic=0 vis=1 desk=0x82a56c0==0x82a56c0 bd->want_focus = 1 E1 bd->want_focus = 1 E1 ...caches flushed. ...caches flushed. ...caches flushed. ...caches flushed. ...caches flushed. bd->want_focus = 0 bd->want_focus = 0 E2 Unknown state: NONE == e_desk_last_focused_focus LAST 0x82e5328 ic=0 vis=0 desk=0x82a56c0==0x82a56c0 LAST 0x880b9e8 ic=0 vis=1 desk=0x82a56c0==0x82a56c0 ...caches flushed. == e_desk_last_focused_focus LAST 0x880b9e8 ic=0 vis=0 desk=0x82a56c0==0x82a56c0 LAST 0x8815618 ic=0 vis=1 desk=0x82a56c0==0x82a56c0 ...caches flushed. I had noticed this problem with acroread for months, but I thought it was specific to my setup. Since e is so fast in restarting, I simply used to Ctrl+Alt+End everytime I used the acroread print! :D Hope the above information is helpful. Carsten Haitzler (The Rasterman) wrote: > On Wed, 17 Sep 2008 19:39:45 -0300 Wido <[EMAIL PROTECTED]> babbled: > > i havent seen this. anywhere. first disable itask-ng or any taskbar and other > modules you added on, then see. > > >> i'm using itask-ng, but as far as i remember, this also happen without >> it. i'm at work now, i'll try this at home >> >> On Wed, Sep 17, 2008 at 7:28 PM, P Purkayastha <[EMAIL PROTECTED]> wrote: >> >>> Wido wrote: >>> >>>> hi folks. i've recently updated E from svn and E it's not closing >>>> windows properly. I't happens that when i click de close butto, the >>>> app stop running, but the windows remains there ass a dead one. Also, >>>> it happens that when i restart e to shut them out, sometimes e doesn't >>>> restart in a proper way and i have to restart X (losing all the open >>>> apps :( ). is this a known bug? >>>> BTW, running debian lenny with a fresh install >>>> >>>> >>>> cheers! >>>> >>>> >>>> >>> Seems to be a bug. A reproducible situation is when you use acroread. If you >>> happen to print the pdf file, then the print dialog never closes,- it >>> becomes a ghost window which vanishes only after an e restart. >>> >>> I wonder if the following is also related: >>> http://code.google.com/p/itask-module/issues/detail?id=43 >>> >>> >> >> -- >> Wido >> >> ------------------------------------------------------------------------- >> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge >> Build the coolest Linux based applications with Moblin SDK & win great prizes >> Grand prize is a trip for two to an Open Source event anywhere in the world >> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >> _______________________________________________ >> enlightenment-users mailing list >> enlightenment-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/enlightenment-users >> >> > > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
