Apologies dh
On 26 July 2011 16:20, Christopher Michael <cpmicha...@comcast.net> wrote:
> Also, I think you sent this whole reply to just me...didn't you want to
> send to the list as well ? ;)
>
>
> dh
>
> On 07/26/11 17:04, Mark Dickie wrote:
>
>> Thanks dh
>>
>> On 26 July 2011 15:18, Christopher Michael<cpmicha...@comcast.net**>
>> wrote:
>>
>> On 07/26/11 15:15, Mark Dickie wrote:
>>>
>>> Using current svn. Ubuntu Natty.
>>>>
>>>> I've deleted all previous builds (nothing in /opt /usr/local),
>>>> downloaded
>>>> new source tree. and rebuilt. deleted .e/ and .cache/efreet.
>>>>
>>>> Compile using easy_e17 including debugging.
>>>>
>>>> from startx it crashes on the splash screen, so I ran it through
>>>> Xephyr/gdb
>>>>
>>>> Xephyr :1.0
>>>> EINA_LOG_LEVEL=3 ECORE_ERROR_ABORT=1 gdb enlightenment_start
>>>> r -display :1.0 from inside gdb
>>>>
>>>> Stays at splash forever, gdb attached below
>>>>
>>>> Hope this means something to somebody :)
>>>>
>>>> I will gladly give /do whatever it takes to get my beloved E back
>>>>
>>>> Cheers
>>>>
>>>>
>>> After a quick look here...seems to be some type of pthread
>>> issue...perhaps
>>> something todo w/ the system being 64bit. Sadly, I do not have much
>>> experience w/ pthread so I personally will not be able to help much, BUT:
>>>
>>> You've got warnings all over the place here that may point someone else
>>> to
>>> a direction:
>>>
>>> WRN<4886>:eet eet_lib.c:717 eet_init() YOU ARE USING PTHREADS, BUT I
>>> CANNOT
>>> INITIALIZE THREADSAFE GCRYPT OPERATIONS!
>>>
>>> You're actual crash is happening when the Splash Shows up and E calls
>>> 'pause' and waits for the Splash to signal it is ready so E can continue.
>>>
>>> A 'work around' for now would be to disable Showing Splash @ startup.
>>> Granted, that does not fix the bug but it should allow you to use E
>>> again.
>>>
>>> Since you cannot get into E to disable the setting, I would recommend the
>>> following procedure:
>>>
>>> Take your e.cfg from the ~/.e/e/config/standard directory (assuming
>>> standard profile here). Decompile it with eet:
>>>
>>> (eet -d e.cfg config e.src)
>>>
>>>
>> mark@Snowy:~/Computer/e_debug$ eet -d e.cfg config e.src
>> ERR<8047>:eet_main eet_main.c:132 do_eet_decode() cannot open for reading:
>> e.cfg
>>
>> Bugger! Methinks there's something horrible going on with eet..
>>
>>
>>> Edit the e.src file with a text editor. Look for:
>>> value "show_splash" int: 1; and change that 1 to a 0.
>>> Save the file.
>>>
>>> Recompile your e.src into e.cfg:
>>>
>>> (eet -e e.cfg config e.src 1)
>>>
>>> Assuming you get this far, congrats :) You now have an e.cfg file without
>>> splash enabled. Make sure it is in ~/.e/e/config/standard (assuming
>>> standard
>>> profile), and then you can try to startup E again.
>>>
>>
followed instructions - worked a charm (I had copied the file to a folder to
work on) and .. no splash, but following error
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff7afb992 in evas_object_smart_member_add (obj=0xa39770,
smart_obj=0xa39770) at evas_object_smart.c:164
164 obj->cur.layer = obj->layer->layer;
(gdb) INF<8200>:ecore ecore_main.c:356 _ecore_main_fdh_poll_del() removing
poll on 11
DB STORE CAP+: /org/freedesktop/UDisks/devices/sda
WRN<8209>:e_ukit e_ukit_private_util.c:186
unmarshal_device_get_all_properties() EUkit Error: unexpected property type
(LuksHolder): o
WRN<8209>:e_ukit e_ukit_private_util.c:186
unmarshal_device_get_all_properties() EUkit Error: unexpected property type
(LuksCleartextSlave): o
WRN<8209>:e_ukit e_ukit_private_util.c:186
unmarshal_device_get_all_properties() EUkit Error: unexpected property type
(PartitionSlave): o
WRN<8209>:e_ukit e_ukit_private_util.c:186
unmarshal_device_get_all_properties() EUkit Error: unexpected property type
(DriveAdapter): o
WRN<8209>:e_ukit e_ukit_private_util.c:186
unmarshal_device_get_all_properties() EUkit Error: unexpected property type
(LinuxMdComponentHolder): o
WRN<8209>:e_ukit e_ukit_private_util.c:186
unmarshal_device_get_all_properties() EUkit Error: unexpected property type
(LinuxDmmpComponentHolder): o
>
>>> If all went well, you should be able to get back in now (until your
>>> bugger
>>> is sorted out anyway).
>>>
>>> Cheers (and Good Luck),
>>>
>>> dh
>>>
>>>
>>> I tried deleting .e/ again..fresh start. With Computer/standard mode it
>> locks solid after the wizard,but if I choose the Touchscreen/illume
>> profile
>> it completes the wizard and starts ok.
>>
>> Does anyone want the full log running the wizard?
>>
>> Many thanks
>>
>>
>
--
Mark Dickie
+57 313 550 7314
Email blaeberr...@gmail.com
Skype blaeberries
------------------------------------------------------------------------------
Got Input? Slashdot Needs You.
Take our quick survey online. Come on, we don't ask for help often.
Plus, you'll get a chance to win $100 to spend on ThinkGeek.
http://p.sf.net/sfu/slashdot-survey
_______________________________________________
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users
