On 4/6/23 00:51, Carsten Haitzler wrote:
On Wed, 5 Apr 2023 14:49:28 -0400 mh via enlightenment-users
<enlightenment-users@lists.sourceforge.net> said:
On 4/5/23 12:43, Carsten Haitzler wrote:
On Tue, 4 Apr 2023 20:22:32 -0400 mh via enlightenment-users
<enlightenment-users@lists.sourceforge.net> said:
I'm just back to using E after a while, using 0.25.4 from Debian sid.
After first logging in, and every time after resuming from
screensaver/blanking, I get the pop-up error message: "You seem to have
no screens configured to be on the given outputs you have. This should
be fixed by going to: Settings-Screen-Screen Setup."
is this a laptop? did you have the lid closed?
it's a desktop, 4080 gpu, evil NVIDIA driver version 530.30.02 installed
this would imply the nvidia driver is unplugging all screens ever time the
screen goes into dpms. check your logs as per previous email and see. all lines
going RRR: will have to do with randr screen stuff.
Not sure which log to check. I looked at Xorg.0.log but didn't see
anything with RRR. I was going to uninstall the nvidia drivers and try
it with nouveau but having problems with X starting. Not sure if nouveau
supports rtx4080 yet.
When I do that, there is a list showing two DP-4 outputs where the
monitor is connected, and a third that lists the monitor. But the only
one that I can set the screen setup settings for is the first DP-4. What
do I need to do to setup the monitor to the output properly?
what? multiple DP-4's - that shouldnt happen. you should have all outputs
named differently. does xrandr (commandline) also list multiple dp-4's?
only one DP-4 with xrandr. this is the output:
$ xrandr
Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767
HDMI-0 disconnected primary (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 connected 3840x2160+0+0 (normal left inverted right x axis y axis)
708mm x 399mm
3840x2160 60.00*+ 144.00 120.00 119.88 59.94 50.00 29.97
2560x1440 143.97 120.00 59.95
1920x1080 143.85 119.88 60.00 59.94
1680x1050 59.95
1440x900 59.89
1280x1024 75.02 60.02
1280x960 60.00
1280x720 119.88 60.00 59.94 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 72.81 59.94 59.93
DP-5 disconnected (normal left inverted right x axis y axis)
are you sure dp-4 is listed twice and it isn't just the hoversel showing the
selected one at the top in addition to the set of possible selections below?
I see DP-4 listed twice, then 32UHD144. If I hover/click over the first
DP-4 I see a DP-4, indented and selectable. But the second one remains
after I select a resolution and hit apply. The 32UHD144 entry is never
selectable.
_______________________________________________
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users
_______________________________________________
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users