On Sun, 1 Nov 2026 19:27:17 +0100 Florian Schaefer <[email protected]> said:
> Hi all, > > thanks for the new enlightenment release! > > After installing it on my Arch system, however, I noticed that suspend > to RAM does not work as it used to. That is, in suspend my power button > LED usually starts to blink. With the new release, my screen would go > blank, but the LED wouldn't start to blink. Digging a bit more, I found > that the kernel reports "Last suspend didn't reach deepest state". > > Below are some excerpts from journalctl. so i had a look - it IMHO is a firmware/kernel bug to not into deepest sleep state if the cpu happens to be eg. in performance mode etc. etc. - suspend should suspend to the same state regardless of state of the cpu before suspend. i put a workaround where e will lower it to the lowest power state before suspend (then reverse on resume), but the problem may still happen. something else other than e may cause the cpu to flip to a performance (for example) mode and thus cause the problem again - and it is not e doing it then. the kernel IMHO *SHOULD* at suspend time after all userspace processes are frozen, force the processor to a lower power state if this would prevent lowest power suspend and then continue suspending. -- ------------- Codito, ergo sum - "I code, therefore I am" -------------- Carsten Haitzler - [email protected] _______________________________________________ enlightenment-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/enlightenment-users
