Hello everyone, and a Happy New Year to you all!

I have a mixed stack of 2x C2G124-48 and 4x C2H124-48P. I recently upgraded the 
stack to 05.02.02.0009 and set the temperature threshold and alerts with the 
command:

        set system temperature syslog enable trap enable overtemp-threshold 50

Since then I sporadically get the following events, but only for unit 5 in the 
stack. I get a lot of these in a burst, but then nothing for several hours.
 
According to the release notes, support for High temperature alerts was 
introduced in 05.02.01.0006, but only for the devices listed (i.e. not 
C2H124-48P).

        "Added support for protecting the health of the switch based on 
predetermined safe operating temperature
        limits. The administrator can change the maximum temperature threshold 
where a trap and syslog message is
        generated warning them of high-temperature conditions before service is 
affected (only available on C2G124-
        48/48P, C2K122-24, C2G170-24, and all C3s.)"

Can anyone help me understand what is going on here. I don't think I've 
misconfigured anything, after all, it's only one command!  

As always, your help is very much appreciated.

Regards,

Andy Middlehurst
Networks First ltd.


<165> JAN 09 02:26:26 192.168.4.1-5 SIM[198984224]: hwutils.c(4162) 657 %% 
sysapiTempSensorRead: System temperature has exceeded the Upper Threshold 
limit. Now the temperature is:38 
<165> JAN 09 02:29:48 192.168.4.1-5 SIM[198984224]: hwutils.c(4180) 658 %% 
sysapiTempSensorRead: System temperature has come down below the upper 
threshold limit . Now the temperature is:37 
<165> JAN 09 03:24:34 192.168.4.1-5 SIM[198984224]: hwutils.c(4162) 659 %% 
sysapiTempSensorRead: System temperature has exceeded the Upper Threshold 
limit. Now the temperature is:38 
<165> JAN 09 03:25:41 192.168.4.1-5 SIM[198984224]: hwutils.c(4180) 660 %% 
sysapiTempSensorRead: System temperature has come down below the upper 
threshold limit . Now the temperature is:37 

NF_Core_1(su)->show switch 
        Management   Preconfig   Plugged-in        Switch             Code  
Switch    Status     Model ID    Model ID          Status            Version
------ ------------ ----------- ----------- --------------------- --------------
1      Mgmt Switch  C2G124-48   C2G124-48   OK                    05.02.02.0009
2      Stack Member C2G124-48   C2G124-48   OK                    05.02.02.0009
3      Stack Member C2H124-48P  C2H124-48P  OK                    05.02.02.0009
4      Stack Member C2H124-48P  C2H124-48P  OK                    05.02.02.0009
5      Stack Member C2H124-48P  C2H124-48P  OK                    05.02.02.0009
6      Stack Member C2H124-48P  C2H124-48P  OK                    05.02.02.0009
NF_Core_1(su)->show system 
System contact:Service Desk x1099
System location:Comms Room
System name:NF_Core_1

Switch 1
--------
PS1-Status                         PS2-Status
----------                         ----------                         
Ok                                 Ok

Fan1-Status                        Fan2-Status
-----------                        -----------                        
Ok                                 Ok

Temp-Alarm
-----------
on
Thermal Threshold: 61%
Switch 2
--------
PS1-Status                         PS2-Status
----------                         ----------                         
Ok                                 Ok

Fan1-Status                        Fan2-Status
-----------                        -----------                        
Ok                                 Ok

Temp-Alarm
-----------
on
Thermal Threshold: 58%
Switch 3
--------
PS1-Status                         PS2-Status
----------                         ----------                         
Ok                                 Ok

Fan1-Status                        Fan2-Status
-----------                        -----------                        
Ok                                 Ok

Temp-Alarm
-----------
on
Thermal Threshold: 48%
Switch 4
--More-- <space> next page, <cr> one line, <q> quit
--------
PS1-Status                         PS2-Status
----------                         ----------                         
Ok                                 Ok

Fan1-Status                        Fan2-Status
-----------                        -----------                        
Ok                                 Ok

Temp-Alarm
-----------
on
Thermal Threshold: 44%
Switch 5
--------
PS1-Status                         PS2-Status
----------                         ----------                         
Ok                                 Ok

Fan1-Status                        Fan2-Status
-----------                        -----------                        
Ok                                 Ok

Temp-Alarm
-----------
on
Thermal Threshold: 49%
Switch 6
--------
PS1-Status                         PS2-Status
----------                         ----------                         
Ok                                 Ok

Fan1-Status                        Fan2-Status
-----------                        -----------                        
Ok                                 Ok

Temp-Alarm
-----------
on
Thermal Threshold: 46%
Temp alarm max threshold:  50%
Temp alarm trap: enabled
Temp alarm syslog: enabled
Uptime d,h:m:s  Logout
--------------  -------
8,23:49:51      10 min
NF_Core_1(su)-> 

 
Andy Middlehurst 
Service Desk: +44 (0)845 850 1177 

Number One
Paper Mill Drive
Church Hill South,
Redditch,
B98 8QJ
Telephone: +44 (0)845 850 5577 
Winners of the Small Business UK Customer Experience Award as featured in The 
Sunday Times 
Networks First's accreditations and skills
Networks First - committed to excellence, committed to you


 
Networks First Ltd , (Registered in England 291 2114)
Data Protection Act Fair Collection Notice: Your data will be processed by 
Networks First Limited at their offices. We will record information relevant to 
the provision of IT services to your company, including your name, business 
address, telephone number, e-mail address and details of your requirements. We 
will use the data to forward to you information on projects and services we 
think may be of interest to you. If you do not want to receive such 
communications, wish to update your registration or have any queries concerning 
this statement, please contact [email protected]


---
To unsubscribe from enterasys, send email to [email protected] with the body: 
unsubscribe enterasys [email protected]

Reply via email to