Jose Luis, The C2s do not support sending fan failure SNMP traps. However, with release 5.2 you can configure a subset of C2 models to send a trap if an administrator-configured thermal threshold is exceeded. This could be an indication of a fan failure or high-temperature in the wiring close that could potentially affect the availability of the network.
Search for thermal threshold in the X.2 config guide...it is settable via the set system temperature command. The list of supported C2 platforms are available in the RNs (basically all the 48 port C2s and the C2K122-24 have a temperature sensor and support this new feature). http://secure.enterasys.com/support/manuals/hardware/9033991-17_C2.pdf Good luck, Will _____________________________ William J. Aguilar, CISSP Director of Product Management Enterasys(R) SecureStackTM Product Family (o) +1-978-684-1721 (c) +1-978-289-3895 [email protected]<mailto:[email protected]> www.enterasys.com<http://www.enterasys.com/> "There is nothing more important than our customers" From: [email protected] [mailto:[email protected]] Sent: Wednesday, March 18, 2009 9:23 AM To: Enterasys Customer Mailing List Subject: [enterasys] C2 fan status MIB OID and traps Hello, I am trying to locate the MIB node which gives access to the Fan status in a C2 switch. Browsing through the official Enterasys MIB (dated November 2008) I found this node: ctChasFanModuleTable OBJECT-TYPE DESCRIPTION "A list of fan module entries." ::= { ctFanModule 1 } -- 1.3.6.1.4.1.52.4.3.1.3.1 [From the CTRON-CHASSIS-MIB file] But everytime I issue a get over this OID I get an empty result. We're running the 5.1.5.4 firmware version. Anyone can help me on this? Besides this question... does anybody know if a C2 should issue a trap when the fan is not working properly? We're only being informed through the syslog events, not from the trap system... Thanks in advance, Jose Luis Rojano * --To unsubscribe from enterasys, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
