The only thing you need is the SMA pigtail (MP372) or R-SMA pigtail (MP422) to N-connector for lightning protector. Here you can connect any wifi antenna for 2.4 or 5 GHz. Please be sure that you are using the connector at the MP you want to use by 2.4 or 5 GHz ! Enable the function for external antenna with choosing any antenna with RASM !
The difference between SMA and R-SMA is important ! Volker Kull Gesch��ftsstellenleiter��üd BELL Computer-Netzwerke GmbHOhmstr. 6 - 76229 Karlsruhe - Germany Tel: +49 (0) 721 6624993-0 Fax: +49 (0) 721 6624993-30e-mail [email protected] www.bell.de Volker Kull BELL Computer-Netzwerke GmbH Ohmstr. 6 - 76229 Karlsruhe (Germany) Tel: +49 721/6624993-0 Fax: +49 721/6624993-30 Email: [email protected] ________________________________ Von: Payne, Jimmy R. An: Enterasys Customer Mailing List Gesendet: Thu Mar 19 20:52:41 2009 Betreff: RE: [enterasys] AP 1602 No they don���t work at all. There is a setting in RASM that allows you to configure the type of antenna that you are connecting the AP to. Either internal or external. The antennas that I have tried, never switch over when you make that change and deploy it. I think at one time I heard someone say something about the antenna required to have a dc coupler. However, I am not sure I know what that means and how to determine if an antenna has that or not. Jimmy Payne, MCP Forsyth County Information Technology Systems Support Administrator 110 East Main Street Suite 130 Cumming, GA 30040 770-205-4558 From: Huber Adrian TRAIL [mailto:[email protected]] Sent: Thursday, March 19, 2009 3:46 PM To: Enterasys Customer Mailing List Subject: RE: [enterasys] AP 1602 Th�����s very interesting and odd. When you say they don���t work, do you mean very poor performance? I noticed all antennas that are supported by 1602 are 50 ohms, could it be possible that the antennas you tried were not 50 ohms? No matter what though, even if you used a paperclip, you should get some kind of signal, otherwise I���d suspect maybe it���s a config/defect issue. Thank you, Adrian G. Huber, CCNA, N+, ESE, ATHC Network Analyst (250) 364 4805 Teck Cominco Metals Ltd. 25 Aldridge Ave Trail, BC V1R 4L8 ________________________________ From: Payne, Jimmy R. [mailto:[email protected]] Sent: Thursday, March 19, 2009 12:27 PM To: Enterasys Customer Mailing List Subject: RE: [enterasys] AP 1602 No I have omnis that will work for the 4102s but I need one that I am certain will work with a 1602. This is the AP that looks like a smoke alarm. I have found a couple that will not work but none yet that will. Jimmy Payne, MCP Forsyth County Information Technology Systems Support Administrator 110 East Main Street Suite 130 Cumming, GA 30040 770-205-4558 From: Huber Adrian TRAIL [mailto:[email protected]] Sent: Thursday, March 19, 2009 3:24 PM To: Enterasys Customer Mailing List Subject: RE:[enterasys] AP 1602 We used just a regular omni from antennex on our 4102 with a lightning arrestor. I think we used a 19dBi for max output power. Unless ����m mistaken, any antenna will work so as long as you use the correct wavelength. Thank you, Adrian G. Huber, CCNA, N+, ESE, ATHC Network Analyst (250) 364 4805 Teck Cominco Metals Ltd. 25 Aldridge Ave Trail, BC V1R 4L8 ________________________________ From: Payne, Jimmy R. [mailto:[email protected]] Sent: Thursday, March 19, 2009 12:08 PM To: Enterasys Customer Mailing List Subject: [enterasys] AP 1602 Can anyone advise me of an omni directional antenna that will work with an AP-1602? Enterasys documentation does not show support for an omni attached to an AP-1602 however, I c�����t imagine that there isn���t one that will work. Hope someone knows. Thanks for the help. Jimmy Payne, MCP Forsyth County Information Technology Systems Support Administrator 110 East Main Street Suite 130 Cumming, GA 30040 770-205-4558 ? --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] ? --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] * --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] * --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] * --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
