Hello everyone. We just completed our first deployment of an RBT-8210 wireless switch with seven (7) 1602 AP's all configured using the RASM software. The deployment is all located on a local subnet, no VLAN tagging no layer 3 required between the controller, AP's and Windows 2003 DHCP server. Everything is connected directly to an SSR-8600. The deployment is very "out of the box" with little or no customization. Basically just one Open Access network using WPA/TKIP.
Everything seemed to be to be working fine initially. We then noticed that some older Fujitsu laptops are not receiving DHCP addresses. The requests are timing out and APIPA is used. You can see them listed in RASM under client connections but with invalid IPs. Then we noticed that iPhones were not receiving IP addresses. Some laptops including newer Fujitsu Lifebooks work fine. The DHCP server being used services ~250 wired clients with no problems and has been for many years. So I am confident in eliminating the DHCP server as the problem. I have a case open with GTAC but progress is developing slowly. I have spent a significant amount of time reading the RASM documentation but nothing has turned up. Anyone have any ideas or settings to check? Seen behavior like this before? Any information would be greatly appreciated. Thank you. --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
