Hello, I know we can update the firmware via xmodem.
I am interested it sending a copy of the switch's config via its serial port to its flash and do "configure configs/switch_10.cfg". On a securestack Switch_10>copy <source> <destination> Source: xmodem:switch_10.cfg For example when I type the command I get an error message on the securestack. Switch_10> copy xmoden:switch_10.cfg configs/switch_10.cfg Error: Couldn't open source file! Anyone know? Kind Regards Ravi K Senior Information Systems Engineer Health Protection Agency Colindale London UK Tel: 0208 327 6890 Dect Tel: 0208 327 6331 ----------------------------------------- ************************************************************************** The information contained in the EMail and any attachments is confidential and intended solely and for the attention and use of the named addressee(s). It may not be disclosed to any other person without the express authority of the HPA, or the intended recipient, or both. If you are not the intended recipient, you must not disclose, copy, distribute or retain this message or any part of it. This footnote also confirms that this EMail has been swept for computer viruses, but please re-sweep any attachments before opening or saving. HTTP://www.HPA.org.uk ************************************************************************** --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
