Yves, The non-auth filter gets applied first to the user. You need to make sure to allow DNS (53) and the IP interface of the VNS in order for the page to pop.
Doug Hyde Escalation Support Engineer Enterasys Networks Phone: 1-978-684-1048 E-mail: <mailto:[email protected]> [email protected]<mailto:[email protected]> 50 Minuteman Rd. Andover, MA 01810 "There is nothing more important than our customers" On May 26, 2010, at 5:18 AM, "Caetano, Yves" <[email protected]<mailto:[email protected]>> wrote: Hi, We acquired a Wireless Controller C20 and would like to set it up with the Guest Portal option. We followed the VNS Wizard but after the configuration is done, we have not able to surf. We get an ip address via DHCP but then nothing else. Even if we try to connect directly to the ip address of the controller we receive a blank page. What else do we need to do to enable the Guest Portal option on the C20? NOTE: Without the Guest Portal option, we are able to surf freely on the internet so by this we assume that our network configuration is working correctly but we would like people to authenticate via the Guest Portal. Thanks for your help. Regards, Yves * --To unsubscribe from enterasys, send email to <mailto:[email protected]> [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected]<mailto:[email protected]> --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
