Hi, If you are working with ipphone not compatible with ciscodp or lldp-med, and switch without lldp-med support (A2H) you will have to configure voice vlan by hand. User vlan : set port vlan fe.1.1 10 modify-egress Voice vlan : Set vlan egress 20 fe.1.1 tagged
7573 : Enterasys Support for the LLDP and LLDP-MED Protocols
Support for the LLDP and LLDP-MED protocols is provided in:
* Matrix N-Series DFE firmware 5.41.25 and higher
* SecureStack C3 firmware 1.01.01.0039 and higher
* SecureStack C2 firmware 5.01.01.0039 and higher
* SecureStack B3 firmware 1.01.01.0039 and higher
* SecureStack B2 firmware 4.01.01.0039 and higher
* G-Series all firmware
* D-Series all firmware
Bye,
Sylvain CONTI
Coordinateur Technique Agence
+33 1 64 53 14 12 +33 6 78 78 07 47
INTEGRATEUR RESEAUX et SECURITE
Agence Ile de France, Immeuble Le Montréal 19bis, avenue du Québec - ZA
Courtaboeuf 91140 Villebon sur Yvette T : +33 1 64 53 14 14 F : +33 1
69 32 14 02
Siège social, Espace Jacques Cartier BP 96031 35360 Montauban de Bretagne
T : +33 2 99 06 61 61 F : +33 2 99 06 36 36
[email protected] <mailto:[email protected]> www.retis.fr <http://www.retis.fr/>
________________________________
De : Lamine b [mailto:[email protected]]
Envoyé : jeudi 4 novembre 2010 10:39
À : Enterasys Customer Mailing List
Objet : RE: [enterasys] Voice Vlan on Enterasys
Hi,
on the config guide of Enterasys switchs, we can read:
A Cisco DP port trust status of trusted or untrusted is only meaningful when a
Cisco IP phone is connected to a switch port and a PC or other device is
connected to the back of the Cisco IP phone.
Whats happen if we use Alcated IP Phone? is it still possible to configure a
port in Enterasys switchs (A2, B3 & C3) which will connect a PC + an IP phone
for different data&voice vlans and tag voice trafic?
Regards,
Lamine
--- En date de : Mer 3.11.10, Andy Middlehurst
<[email protected]> a écrit :
De: Andy Middlehurst <[email protected]>
Objet: RE: [enterasys] Voice Vlan on Enterasys
À: "Enterasys Customer Mailing List" <[email protected]>
Date: Mercredi 3 novembre 2010, 18h48
Hi Lamine,
I don't know about the A/B series buy yes this is certainly possible on
the C2/C3 with the following commands:
set ciscodp status enable
set ciscodp port vvid 3 <port-list>
where 3 is the voice vlan. Remember to set the ports as egressing vlan
3 TAGGED. ie:
set vlan egress 3 fe.3.11-20 tagged
Regards,
Andy Middlehurst
From: Lamine b [mailto:[email protected]]
Sent: 03 November 2010 17:27
To: Enterasys Customer Mailing List
Subject: [enterasys] Voice Vlan on Enterasys
Hi,
Is it possible to configure voice vlan on Enterasys C3,B3 and A2 switchs???
like cisco:
switchport acces vlan 10
switchport voice vlan 20
Regards,
Lamine
* --To unsubscribe from enterasys, send email to [email protected]
with the body: unsubscribe enterasys [email protected]
* --To unsubscribe from enterasys, send email to [email protected]
with the body: unsubscribe enterasys [email protected]
* --To unsubscribe from enterasys, send email to [email protected] with
the body: unsubscribe enterasys [email protected]
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]<<att39190.gif>>
