Hi,
There someone have this scenario before or already deployed? I'm trying to connect the S4 Chassis (CORE) to some Foundry EdgeIron Switches (DISTRIBUTION and EDGE) and the only way that I'm able to pass communication between links is disabling the spanning tree on the Foundry uplink port to the S4 Chassis. If I have enable the spanning tree globally and on the uplinks port in both the communication hangover. The firmware operation code of the EdgeIron 4802cf is 2.2.4.29. The S4 Chassis has the latest firmware installed 7.11.01.0026 released on 01-Nov-2010. If have LACP configured in both the only way that I'm able to pass communication between both is disabling the spanning tree on the S4 Chassis uplink port, because the Foundry's one when configured the LACP it disable automatically the spanning tree on the ports forming the LACP and in the LACP itself. Egbert Rodriguez Hernandez Jr. Network Engineer CCTV Level I, ESE Caribbean Micro Services Tel. 787-620-7780 x4327 Fax.787-620-7784 Mobile.787-224-0193 <BLOCKED::http://www.caribbeanmicro.com> www.caribbeanmicro.com CONFIDENTIALITY NOTE: The information contained in this e-mail and its attachments are proprietary and confidential to Caribbean Micro Services, Inc.(CMS), its affiliates or its clients. They may not be disclosed, distributed, used, copied or modified in any way without CMS, Inc.s authorization. If you are not the intended recipient of this email, you are not an authorized person. If the reader of this message is not the intended recipient, please delete it and notify its original sender immediately. CMS, Inc. and its affiliates do not assume any liability for damages resulting from emails that have been sent or altered without their consent. Moreover, CMS, Inc. has taken precautions to safeguard its email communications, but cannot assure that such is the case and disclaim any responsibility attributable thereof. --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
