Hi Dirk, I *ALWAYS* configure the physical ports with the same vlan egress as the logical port. By far the best way of knowing what's happening.
Say you have three vlans; 10, 20, 30 and you want ge.1.1 and ge.2.1 as ports in the lag.0.1 (assuming you've created the static lag already and assigned the ports to the lag with the same aadminkey) set vlan egress 10,20,30 ge.1.1;ge.2.1;lag.0.1 tagged Regards, Andy Middlehurst -----Original Message----- From: Dirk Cornelis [mailto:[email protected]] Sent: 17 May 2011 10:09 To: Enterasys Customer Mailing List Subject: [enterasys] Vmware lacp setup question Hi All, I need to set up multiple Vmware ESX servers(version esxI, 4 and 4.1) on an S8 switch, I would like to know the recommended, or best way to configure a 3 or 4 way 1G connection using LACP and supporting multiple VLANS ... I already know we need to use static LACP, but unsure about which interfaces need to have the tagged vlan definitions, only the LACP or each interface in the lacp? Singleportlag is already enabled ... Looking for working configs ... Kind Regards. DC. --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
