NOTE: If you have any VLAN mirrors configured they will not exist after the
upgrade. This is due to the name change from vlan.0.x to vtap.0.x. As far as
I know this has not been corrected yet.
For example, after upgrading:
set port mirroring create vlan.0.11 ge.4.7 both
... will not exist. You'll need to re-enter it as:
set port mirroring create vtap.0.11 ge.4.7 both
... following the upgrade.
Physical port mirrors will be fine.
Jay
From: Patrick Printz [mailto:[email protected]]
Sent: Tuesday, July 19, 2011 9:24 AM
To: Enterasys Customer Mailing List
Subject: RE: [enterasys] Can I use Inventory Manager to upgrade DFE platinum
firmware from 6.11 to 7.21?
I have used inventory manager to do this, but the loss of IP meant I had to go
an re-IP the device.
Patrick Printz
Network Infrastructure
Quinsigamond Community College
670 West Boylston Street
Worcester, MA 01606-2092
w. 508-854-7517
c. 508-726-9529
"Opportunities multiply as they are seized."
- Sun Tzu
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, July 19, 2011 8:19 AM
To: Enterasys Customer Mailing List
Subject: [enterasys] Can I use Inventory Manager to upgrade DFE platinum
firmware from 6.11 to 7.21?
Classification: NON SENSITIVE INFORMATION RELEASABLE TO THE PUBLIC
Can Inventory manager do this directly, or do I have to download the image
manually, don't reboot, save the config file, set the boot image, then run the
config command, manually? I have 40 switches to upgrade and this will get
pretty tedious to do manually...
Regards,
Jesse W. Ohlsson
Engineer, Information Systems Administration
NCSA Sector Mons, Customer Services Squadron
B7010 SHAPE Belgium
tel: +32-65-44-8518; NCN 254-8518
* --To unsubscribe from enterasys, send email to
[email protected]<mailto:[email protected]> with the body: unsubscribe enterasys
[email protected]<mailto:[email protected]>
* --To unsubscribe from enterasys, send email to
[email protected]<mailto:[email protected]> with the body: unsubscribe enterasys
[email protected]<mailto:[email protected]>
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
