Hi Geoffroy,
we do not have any experience with LACP and NetApp, but we are running
LACP betweeen Enterasys-Enterasys, Enterasys-Cisco, Enterasys-servers
and Cisco-servers.
On the Enterasys side we usually configure for LACP:
set lacp aadminkey lag.0.1 1
set lacp singleportlag enable
set port lacp port ge.1.1-2 aadminkey 1
On C5 series you need an "enable" on the "set port enable" command:
set port lacp port ge.1.1-2 aadminkey 1 enable
Kind regards
Reinhard
Am 17.01.2012 16:35, schrieb [email protected]:
Hello,
We try to test aggregation link with a NAS server (NetApp) and a C5. The
NetApp is configured with two networks cards in a vif and in the multi
mode. For the C5, we have configured the lacp static :
Set lacp static lag.0.1 key 1 ge.1.1-2
Set lacp singleportlag enable
It’s the only way to attach ports in the lag and to see and to ping the
server.
Anyway it’s impossible to see it with Console in Compass.
Have you this configuration or something like this ? have you made it in
a different way ?
Thanks !
**Geoffroy HUGUENIN**
CEA VALDUC
VA/DSTA/STLI/LSIS
21120 IS-SUR-TILLE
Téléphone : 03 80 23 77 80
* --To unsubscribe from enterasys, send email to [email protected]
<mailto:[email protected]> with the body: unsubscribe enterasys
[email protected]
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
